Sign In
Manual Chucks
จัดจำหน่ายสินค้าของ SMW AUTOBLOK
จัดจำหน่ายสินค้าของ SMW AUTOBLOK Germany จำหน่าย Smw-Autoblok ในประเทศ ประเทศไทย
สายด่วน 098-4288648
E-mail : sales@mechatronics.co.th
จัดจำหน่ายสินค้าของ SMW AUTOBLOK Germany จำหน่าย Smw-Autoblok ในประเทศ ประเทศไทย จำหน่ายและบริการสินค้าในแวดวงอุตสาหกรรม อะไหล่วิศวกรรมนำเข้าจากทั่วโลกและมีบริการหลังกาาขายทุกสินค้า SMW AUTOBLOK WTO DRIVEN TOOLS METROL SENSOR TOSOKU VEKTEK miniBOOSTER KELCH ONIKAZE NAKASEIKI AIR CHUCK KHANSTN HOWA CHUCK RIKENSEIKI FIMEC MOTOR ORTLIEB OTT-JAKOB Universal Punch Concentricity Gage Arobotech Steady Rest MicroCentric air chucks KELCH YHB ECO DACELL TORMEK BISON CHUCK Accuvision Technology HOLDWELL
ติดต่อฝ่ายขาย คุณภูรินทร์ 098-4288648 LINE ID : 0984288648 Email : sales@mechatronics.co.th
ติดต่อฝ่ายขาย คุณภูรินทร์ 098-4288648 LINE ID : 0984288648 Email : sales@mechatronics.co.th
Turning
General catalog of all SMW-AUTOBLOK products dedicated to rotary work holding equipments on lathes. Here is the world's largest range of manual and automatic chucks in all versions.
Closed Center Power Chucks
Open Center Power Chucks
Quick jaw change power chucks
Pull-down chucks / Compensating chucks / Indexing chucks / Shaft chucks / Column chucks / 6 jaw 2+2+2 chucks
Diaphragm chucks
Collet chucks / Bar pulling chucks
Manual or power operated expanding mandrels / Adapter flanges
Closed center cylinders / Open center cylinders / Double piston cylinders
Pneumatic/hydraulic front-end chucks / Control units
Self-centering steady rests for turning and grinding
Static chucks pneumatic / hydraulic
Chuck switching system / Chuck flanges / Top jaws / T-nuts / Grippers / Gripping force meter / Grease / Accessories
Manual Chucks
HG-N
QUICK JAW CHANGE
Jaw system original SMW
Quick jaw change manual chucks Ø 160 - 630 mm
- Tongue & Groove
- with through hole
- quick jaw change system original SMW
- 3 jaws
HG-N
QUICK JAW CHANGE
Jaw system original SMW
Quick jaw change manual chucks Ø 160 - 630 mm
- Tongue & Groove
- with through hole
- quick jaw change system original SMW
- 3 jaws
HG-NB
QUICK JAW CHANGE
Jaw system original SMW
Quick jaw change manual chucks Ø 800 - 1000 mm
- Tongue & Groove
- with extra large through hole
- quick jaw change
- all existing top jaws can be used
- 3 jaws
HG-2G
QUICK JAW CHANGE
Jaw system original SMW
Quick jaw change manual chucks Ø 400 - 630 mm
- Tongue & Groove
- with through hole
- quick jaw change
- 3 jaws
- Lubrication channels in the jaw guide ways
- Mechanic sealed-low maintenance
HG-B-2G
QUICK JAW CHANGE
Jaw system original SMW
Quick jaw change manual chucks Ø 800 - 1000 mm
- Tongue & Groove
- with extra large through hole
- quick jaw change
- all existing top jaws can be used
- 3 jaws
- Mechanic sealed-low maintenance
HG-F
QUICK JAW CHANGE
Jaw system Forkardt
Quick jaw change manual chucks Ø 160 - 400 mm
- Tongue & Groove
- with through hole
- quick jaw change-jaw system Forkardt
- 3 jaws
PTF
Tongue & groove
Manual clamping and radial setting of jaws
High precision 4 jaws independent manual chucks Ø 530- 2000 mm
- Closed center
- 4 jaws (all diameters)
JBX
Manual jaw box
SMW-AUTOBLOK standard
JBX-2G
Manual jaw box with semi-finished body
High precision, resistance and power manual jaw box
- Accessory for faceplates, 4 jaws independent manual or other chucks
- Internal or external clamping
Centco4-MLW
Centco4MLW
4 jaws chucks Ø 315 - 1400 mm
- Indipendent self centering clamping in 2 axis
- Weight-optimized chuck body
- 4 jaw
Closed Center Power Chucks
AN-D
INCH serration
AN-M
METRIC serration
High precision power chucks Ø 125 - 400 mm
- Closed center
- 2 and 3 jaws (4 jaws only Ø 400 mm)
AL-D
INCH serration
AL-M
METRIC serration
High precision power chucks Ø 125 - 400 mm
- Closed center
- Long stroke
- 2 and 3 jaws (4 jaws only Ø 400 mm)
AN-C
Tongue & groove
High precision power chucks Ø 165 - 400 mm
- Closed center
- 3 and 3 jaws (4 jaws only Ø 400 mm)
AP-D
INCH serration
AP-M
METRIC serration
High precision fully sealed power chucks Ø 170 - 400 mm
- Closed center
- 2 jaws (only Ø 215-260) and 3 jaws
- proofline® chucks = fully sealed–low maintenance
AP-C
Tongue & groove
High precision fully sealed power chucks Ø 170 - 400 mm
- Closed center
- 2 jaws (only Ø 215-260) and 3 jaws
- proofline® chucks = fully sealed–low maintenance
APL-D
INCH serration
APL-M
METRIC serration
High precision fully sealed power chucks Ø 215 - 400 mm
- Closed center
- Longstroke
- 3 jaws
- proofline® chucks = fully sealed–low maintenance
APL-D
INCH serration
APL-C
Tongue & groove
High precision fully sealed power chucks Ø 500 - 1000 mm
- Closed center
- Long stroke
- 3 jaws
- proofline® chucks = fully sealed–low maintenance
APL-C
Tongue & groove
High precision power chucks Ø 215 - 400 mm
- Long stroke
- Closed center
- 3 jaws
- proofline® chucks = fully sealed–low maintenance
NT-C
Tongue & groove
High precision fully sealed power chucks Ø 170 - 400 mm
- Centrifugal force compensation
- Closed center
- 3 jaws
- proofline® chucks = fully sealed–low maintenance
NT-D
INCH serration
NT-M
METRIC serration
High precision fully sealed power chucks Ø 170 - 400 mm
- Centrifugal force compensation
- Closed center
- 3 jaws
- proofline® chucks = fully sealed–low maintenance
NTL-D
INCH serration
NTL-M
METRIC serration
High precision fully sealed power chucks Ø 260 - 400 mm
- Centrifugal force compensation
- Closed center - 3 jaws
- Long stroke
- proofline® chucks = fully sealed–low maintenance
NTL-C
LONG STROKE
Tongue & groove
High precision fully sealed power chucks Ø 260 - 400 mm
- Centrifugal force compensation
- Closed center - 3 jaws
- Long stroke
- proofline® chucks = fully sealed–low maintenance
NTL-D
INCH serration
NTL-C
Tongue & groove
High precision fully sealed power chucks Ø 500 - 1000 mm
- Centrifugal force compensation
- Closed center - 3 jaws
- Long stroke
- proofline® chucks = fully sealed–low maintenance
IN-D 500-800
INCH serration
IN-C 500-800
Tongue & groove
High precision power chucks Ø 500 - 800 mm
- Closed center
- 3 and 4 jaws
IL-D 500-800
INCH serration
IL-C 500-800
Tongue & groove
High precision power chucks Ø 500 - 800 mm
- Closed center
- Long stroke
- 3 and 4jaws
IND-CP
INCH serration
MODULE 2 serration
High precision power chucks Ø 500 - 1250 mm
- Closed center
- Closed center
- 3 jaws
IN-D 3-6 JAWS
MODULE 2 serration
IL-D
Long jaw stroke
High precision power chucks Ø 660 - 2500 mm
- Radial setting of jaws
- Long jaw stroke
- 3 and 6 jaws (all diameters)
IN-D 4 JAWS
MODULE 2 serration
IL-D
Long jaw stroke
High precision power chucks Ø 1000 - 1600 mm
- Long jaw stroke
- 4 jaws (all diameters)
IR-C Ø 660 - 2500 mm
Tongue & groove
High precision pull-down chucks Ø 160 - 400 mm
- Pull-down effect of inclined master jaws
- Closed center
- 3 and 6 jaws (all diameters)
IR-C Ø 660 - 2000 mm
Tongue & groove
High precision power chucks Ø 80 - 315 mm
- Long stroke
- Closed center
- 4 jaws (all diameters)
RAN
Tongue & groove
High precision power chucks Ø 160 - 400 mm
- Large through hole
- Tongue & groove master jaws
- 3 jaws
CL-C
Tongue & groove
CL-D
INCH serration
High precision power chucks Ø 80 - 315 mm
- Large through hole
- Closed center
- 2 jaws
Open Center Power Chucks
BH-D
INCH serration
High precision power chucks Ø 130 - 450 mm
- Large through hole
- 2, 3 and 4 jaws
BH-M
METRIC serration
High precision power chucks Ø 130 - 450 mm
- Large trough-hole
- 2, 3 and 4 jaws
- 130-165-210-250-315-320-400-450 sizes
BH-D BIG DIAMETERS
INCH serration
High precision power chucks Ø 500-800 mm
- EXTRA large through hole
- 3 jaws
BHD-FC
INCH serration
BHM-FC
Metric serration
High precision power chucks Ø 165 - 630 mm
- Large through hole
- Large through hole
- 3 jaws
BP-D
INCH serration
BP-M
Metric serration
High precision power chucks Ø 220 - 320 mm
- large through hole
- 3 jaws
- proofline® chucks = fully sealed–low maintenance
BP-C
Tongue & groove
High precision power chucks Ø 220 - 320 mm
- Wedge-bar design
- 3 jaws
- proofline® chucks = fully sealed–low maintenance
BB-D
INCH serration
BB-M
Metric serration
High precision power chucks Ø 140 - 435 mm
- 3 jaws
HFKN-D/-M
INCH/ METRIC Serration
HFKN-C
TONGUE & GROOVE
High precision power chucks Ø 110 - 500 mm
- Large through hole
- 3 jaws
HFKS-2G
INCH/ METRIC Serration
Wedge-hook design with centrifugal force compensation
High precision power chucks Ø 165 - 320 mm
- Large through hole
- 3 jaws
- Reduced weight
Centco4
INCH Serration
4-Jaw chucks Ø 210 - 400 mm
- Independent self centering clamping in 2 axis
- Centrifugal force compensation
- 4 jaws
- Large through hole
Quick jaw change power chucks
KNCS-N Ø 140 - 630 mm
QUICK JAW CHANGE
Quick jaw change power chucks Ø 140 - 630 mm
- Large through hole
- High speed
- High flexibility: jaws radially adjustable/reversible
- 3 Jaws
KNCS-N Ø 210 - 325 mm
QUICK JAW CHANGE
Quick jaw change power chucks Ø 210 - 325 mm
- 2 Jaws
- Large through hole
- High speed
- High flexibility: jaws radially adjustable/reversible
KNCS-NB
QUICK JAW CHANGE
Wide master jaws
Quick jaw change power chucks Ø 210 - 800 mm
- Large through hole
- High flexibility: jaws radially adjustable/reversible
- 3 Jaws
- Suitable to take any type of existing top jaws
KNCS-NBX
QUICK JAW CHANGE
Wide master jaws
Quick jaw change power chucks Ø 425 - 1000 mm
- EXTRA large through hole
- EXTRA long piston guide
- High flexibility: jaws radially adjustable/reversible
- 3 Jaws
- Suitable to take any type of existing top jaws
KNCS-2G
QUICK JAW CHANGE
Fully sealed
Quick jaw change power chucks Ø 170 - 630 mm
- Large through hole
- Protection against dust and swarf
- High flexibility: jaws radially adjustable/reversible
- 3 Jaws
KNCS-NB-CL
CENTER LINE
Wide master jaws
High precision power chucks Ø 630
- Quick jaw change
- Large through hole
- Radial fine adjustment
- High flexibility: jaws radially adjustable / reversible
AP-RC
Quick jaw change
Tongue & groove
AP-RD
Quick jaw change
Serration
Quick jaw change high precision power chucks Ø 170 - 400 mm
- Closed center
- 3 jaws
- proofline® chucks = fully sealed–low maintenance
NT-RC
Quick jaw change
Tongue & groove
NT-RD
Quick jaw change
Serration
Quick jaw change high precision power chucks Ø 170 - 400 mm
- Centrifugal force compensation
- 3 jaws, closed center
- proofline® chucks = fully sealed–low maintenance
KIT-RR
Converts a standard chuck into a quick jaw change chuck
Available from 210 to 400
Available for inch or metric serration master jaws
- For AP-BH-NT SMW-Autoblok’s power chucks
- Easy coupling and uncoupling with spring-loaded button
- Safety against accidental release
- Suitable for manual and/or robotic use
- Ready for a robotized change
NTL-RR
Quick jaw change
Long jaw stroke
proofline® chucks = fully sealed – low maintenance
High precision 3 jaw sealed power chuck Ø 260 - 400 mm
- Costant gripping force with permanent grease lubrication
- Long jaw stroke
- Chuck body and internal parts case hardened
- Center bore for coolant and/or air
APL-RR
quick jaw change
proofline® chucks = fully sealed – low maintenance
High precision 3 jaw sealed power chuck Ø 215 - 400 mm
- Extra long jaw stroke
- Costant gripping force with permanent grease lubrication
- Center bore for coolant and/or air
- Chuck body and internal parts case hardened
- proofline® chucks = fully sealed – low maintenance
MANUAL JACK - MJ
Manual Jack to operate a power chuck
with Ø300-520 Plain Back
The large variety of SMW-Autoblok power chucks allow the customer to clamp the workpiece with the best chuck alternatives
- Irreversible mechanism based on an operating screw driven by a worm gear
- With spring energy storage for safe clamping
- Sealed mechanism and constantly lubricated
- Very low profile and possibility to integrate it in the machine pallet
Pull-down chucks / Compensating chucks / Indexing chucks / Shaft chucks / Column chucks / 6 jaw 2+2+2 chucks
TSF-C
Self centering
Floating jaws
TSR-C
Self centering
Rigid jaws
High precision pull-down chucks Ø 135 - 650 mm
- Active pull-down
- Tongue & groove
- 3 jaws
TSF-C
Self centering
Floating jaws
High precision pull-down chucks Ø 170 - 315 mm
- Active pull-down
- Tongue & groove
- 2 jaws
TSF-RM
Self centering
Floating jaws
TSR-RM
Self centering
Rigid jaws
Quick jaw change pull-down chucks Ø 170 - 530 mm
- Active pull-down
- Quick jaw change with pallets
- Tongue & groove pallets - 3 jaws
TSF-CP
Compensating
Floating jaws
TSR-CP
Compensating
Rigid jaws
Compensating pull-down chucks Ø 135 - 650 mm
- Active pull-down
- Tongue & groove
- 3 jaws
TSF-CP
Compensating
Floating jaws
Compensating pull-down chucks Ø 170 - 315 mm
- Active pull-down
- Tongue & groove
- 2 jaws
TSBF-C
Self centering
Floating jaws
TSBR-C
Self centering
Rigid jaws
High precision pull-down chucks Ø 220 - 330 mm
- Active pull-down
- Tongue & groove
- Large through hole
- 3 jaws
TSBF-CP
Compensating
Floating jaws
TSBR-CP
Compensating
Rigid jaws
Compensating pull-down chucks Ø 220 - 330 mm
- Active pull-down
- Tongue & groove
- Large through hole
- 3 jaws
- proofline® chucks = fully sealed–low maintenance
FRC-N
Compensating clamping
Tongue & groove
Lever chuck Ø 215 - 365 mm
- Pull-down to axial datum
- Spring loaded or fixed center
- proofline® chucks = fully sealed–low maintenance
FRS
Self centering clamping
Tongue & groove
Lever chuck Ø 215 - 365 mm
- Self centering clamping
- Large through hole
- proofline® chucks = fully sealed–low maintenance
TPT-C Ø 210 - 400 mm
2+2 independent jaw movement
Tongue & groove
High precision 2+2 jaw power chuck with self-centering independent jaw movement Ø 210 - 400 mm
- Closed center
- Tongue & groove
TPT-C Ø 500 - 800 mm
2+2 independent jaw movement
Tongue & groove
High precision 2+2 jaw power chuck with self-centering independent jaw movement Ø 500 - 800 mm
- Closed center
- Tongue & groove
TPT-RC
2+2 independent jaw movement
Tongue & groove
High precision 2+2 jaw power chuck with self-centering independent jaw movement Ø 1000 - 2000 mm
- Closed center
- Tongue & groove
TX-C
Self centering
Rigid jaws
High precision pull-down chucks Ø 170 - 530 mm
- Active pull-down
- Tongue & groove
- 3 jaws
TX-RV
Self centering
Rigid jaws
Quick jaw change, high precision pull-down chucks Ø 170 - 530 mm
- Active pull-down
- Quick jaw change (internal / external)
- 3 jaws
TSX-C 2+2
Pull down chuck
4 jaws 2+2
High precision pull-down chucks Ø 265 - 315 mm
- Active pull-down
- 2+2 jaws
- Tongue & groove
TEF-C
2+2+2 equalising
6 floating jaws
TER-C
2+2+2 equalising
6 rigid jaws
High precision pull-down 2+2+2 equalising Ø 260 - 850 mm
- Active pull-down
- Tongue & groove
- 6 jaws 2+2+2
SJL-C
Self centering
Tongue & groove
SJL-M
Self centering
Metric serration
High precision 6 jaw chucks (2+2+2) equalising Ø 225 - 400 mm
- Jaws equalising as pair
- Equalising mechanism lockable
SJL-C
6 jaws (2+2+2) equalising
Self centering
High precision power chucks Ø 225 - 800 mm
- For thin walled or deformation sensitive components
- Tongue & groove / metric serration
- Centrifugal force compensation
- Jaws equalising as a pair / mechanism lockable
- proofline® chucks = fully sealed – low maintenance
SJLS-C
6 jaws (2+2+2) equalising -Self centering
Stationary
Catalog of all SMW-AUTOBLOK products dedicated to static work holding for machining centers, milling machine and special machines.
Zero Point Clamping System
5 Axis Machine Tools
Stationary Chuck
Twin Vises
Multiple Clamping System
Tombstones
Precision Machine Vices
Sinter Grip Clamping Insert
Manual chucks Stationary Catalog
Stationary Chucks Pneum Hydraulic
Automation
General catalog of all SMW-Autoblok products dedicated to the Automation
APS zero point system
Manual Rotary plate
AUTOMATIC ROTARY PLATE
AUTOMATIC+3 FEEDINGS ROTARY PLATE
AT-PM Automatic chuck change system
Universal 2-3 Grippers
2-3 Grippers
PRS Robot quick change systems
Mechatronic
Storage and loading station
APS zero point system
APS 100
Zero Point Clamping System Modules
Turbo Function to increase the pull-down force
APS 100 E BASIC and APS 100 E PREMIUM
2 Clamping slides
- Suitable for automation
- Anti-rotation key seat (for APS 100 E-PREMIUM)
- Air sensing (for APS 100 E-PREMIUM)
- Air cleaning (for APS 100 E-PREMIUM)
- Modules fully sealed (proofline)
- Maximum pull-in forces due to turbo function
APS 140
Zero Point Clamping System Modules
Turbo Function to increase the pull-down force
3 Clamping slides
- Suitable for automation
- Low installation height due to compact design
- Modules fully sealed (proofline)
- Maximum pull-in forces due to turbo function
APS 160
Zero Point Clamping System Modules
Turbo Function to increase the pull-down force
3 Clamping slides
- Suitable for automation
- Low installation height due to compact design
- Modules fully sealed (proofline)
- Maximum pull-in forces due to turbo function
APS 190
Zero Point Clamping System Modules
Turbo Function to increase the pull-down force
3 Clamping slides
- Suitable for automation
- Low installation height due to compact design
- Modules fully sealed (proofline)
- Maximum pull-in forces due to turbo function
APS 250
Zero Point Clamping System Modules
Turbo Function to increase the pull-down force
3 Clamping slides
- Suitable for automation
- Low installation height due to compact design
- Modules fully sealed (proofline)
- Maximum pull-in forces due to turbo function
Manual Rotary plate
MANUAL Rotary Plate Ø202
with 2 pneumatic connections for manual opening and TURBO
manual operation of the single APS
with APS 190 manual operation
Manual tooling fast set-up for Ø 210-250 and Ø 315 pallets and chucks
- Pallet/Tooling fast set-up
- Chucks fast set-up Ø210 Ø250 and Ø315 on turning spindles, manual connection (with screw) between chuck and cylinder
- Positioning accuracy < 0,005 mm
- Case hardened main components to assure better accuracy and long life
- Pneumatic opening (OPEN) / Closing by spring + Turbo function
- Opening/closing manually operated
MANUAL Rotary Plate Ø260
with 2 pneumatic connections for manual opening and TURBO
manual operation of the single APS
with APS 250 manual operation
Manual tooling fast set-up for Ø 210-250 and Ø 315 pallets and chucks
- Pallet/Tooling fast set-up
- Chucks fast set-up Ø210 Ø250 and Ø315 on turning spindles, manual connection (with screw) between chuck and cylinder
- Positioning accuracy < 0,005 mm
- Case hardened main components to assure better accuracy and long life
- Pneumatic opening (OPEN) / Closing by spring + Turbo function
- Opening/closing manually operated
MANUAL Rotary Plate Ø330
with 2 pneumatic connections for manual opening and TURBO
manual operation of the three APS
with 3 APS 140 manual operation
Manual tooling fast set-up for Ø 250-315 pallets and chucks
- Pallet/Tooling fast set-up
- Chucks fast set-up Ø250 and Ø330 on turning spindles, manual connection (with screw) between chuck and cylinder
- Positioning accuracy < 0,005 mm
- Case hardened main components to assure better accuracy and long life
- Pneumatic opening (OPEN) / Closing by spring + Turbo function
- Opening/closing manually operated
MANUAL Rotary Plate Ø420
with 2 pneumatic connections for manual opening and TURBO
manual operation of the four APS
with 4 APS 140 manual operation
Manual tooling fast set-up for Ø 400 pallets and chucks
- Pallet/Tooling fast set-up
- Chucks fast set-up Ø400 on turning spindles, manual connection (with screw) between chuck and cylinder
- Positioning accuracy < 0,005 mm
- Case hardened main components to assure better accuracy and long life
- Pneumatic opening (OPEN) / Closing by spring + Turbo function
- Opening/closing manually operated
MANUAL Rotary Plate Ø520
with 2 pneumatic connections for manual opening and TURBO
manual operation of the five APS
with APS 190 and 4 APS 160 manual operation
Manual tooling fast set-up for Ø 500 and Ø 650 pallets and chucks
- Pallet/Tooling fast set-up
- Chucks fast set-up Ø500 and Ø650 on turning spindles, manual connection (with screw) between chuck and cylinder
- Positioning accuracy < 0,005 mm
- Case hardened main components to assure better accuracy and long life
- Pneumatic opening (OPEN) / Closing by spring + Turbo function
- Opening/closing manually operated
MANUAL Rotary Plate Ø650
with 2 pneumatic connections for manual opening and TURBO
manual operation of the five APS
with APS 190 and 4 APS 160 manual operation
Manual tooling fast set-up for Ø 650 and Ø 800 pallets and chucks
- Pallet/Tooling fast set-up
- Chucks fast set-up Ø650 and Ø800 on turning spindles, manual connection (with screw) between chuck and cylinder
- Positioning accuracy < 0,005 mm
- Case hardened main components to assure better accuracy and long life
- Pneumatic opening (OPEN) / Closing by spring + Turbo function
- Opening/closing manually operated
MANUAL Rotary Plate Ø1000
with 2 pneumatic connections for manual opening and TURBO
manual operation of the seven APS
with APS 250 and 6 APS 160 manual operation
Manual tooling fast set-up for Ø 1000 and Ø 1250 pallets and chucks
- Pallet/Tooling fast set-up
- Chucks fast set-up Ø1000 and Ø1250 on turning spindles, manual connection (with screw) between chuck and cylinder
- Positioning accuracy < 0,005 mm
- Case hardened main components to assure better accuracy and long life
- Pneumatic opening (OPEN) / Closing by spring + Turbo function
- Opening/closing manually operated
MANUAL Rotary Plate Ø1400
with 2 pneumatic connections for manual opening and TURBO
manual operation of the nine APS
with APS 250 and 8 APS 160 manual operation
Manual tooling fast set-up for Ø 1400-1600 and Ø 1800 pallets and chucks
- Pallet/Tooling fast set-up
- Chucks fast set-up Ø1400, Ø1600 and Ø1800 on turning spindles, manual connection (with screw) between chuck and cylinder
- Positioning accuracy < 0,005 mm
- Case hardened main components to assure better accuracy and long life
- Pneumatic opening (OPEN) / Closing by spring + Turbo function
- Opening/closing manually operated
Rotary Plate accessories
Pneumatic rotating manifolds / Adaptors / Cover
Accessories available for Rotary Plates
- Pneumatic manifolds: 4 PNEUMATIC Feedings ROTATING MANIFOLD to use with standard RU 2-22 rotating joint
- Pneumatic manifolds: 3 PNEUMATIC Feedings ROTATING MANIFOLD for APS modules Automatic operation
- Adaptors FLANGE ISO-A: direct, reduction and increasing assembly
- Covers: magnet protection covers for 140 APS and 160 APS
- Covers: magnet protection covers for 190 APS and 250 APS
AUTOMATIC ROTARY PLATE
AUTOMATIC Rotary Plate Ø202
with APS 190 automatic operation
Automatic or manual tooling fast set-up for Ø 170 and Ø 210 turning workholding
- Pallet/Tooling fast set-up on turning spindles
- Positioning accuracy < 0,005 mm
- Case hardened main components to assure better accuracy and long life
- Pneumatic opening (OPEN) / Closing by spring + Turbo function
- Opening/closing automatically operated
AUTOMATIC Rotary Plate Ø260
with APS 250 automatic operation
Automatic or manual tooling fast set-up for Ø 210-250-315 turning workholding
- Pallet/Tooling fast set-up on turning spindles
- Positioning accuracy < 0,005 mm
- Case hardened main components to assure better accuracy and long life
- Pneumatic opening (OPEN) / Closing by spring + Turbo function
- Opening/closing automatically operated
AUTOMATIC Rotary Plate Ø330
with 3 APS 140 automatic operation
Automatic or manual tooling fast set-up for Ø 330 turning workholding
- Pallet/Tooling fast set-up on turning spindles
- Positioning accuracy < 0,005 mm
- Case hardened main components to assure better accuracy and long life
- Pneumatic opening (OPEN) / Closing by spring + Turbo function
- Opening/closing automatically operated
AUTOMATIC Rotary Plate Ø420
with 4 APS 140 automatic operation
Automatic or manual tooling fast set-up for Ø 400 turning workholding
- Pallet/Tooling fast set-up on turning spindles
- Positioning accuracy < 0,005 mm
- Case hardened main components to assure better accuracy and long life
- Pneumatic opening (OPEN) / Closing by spring + Turbo function
- Opening/closing automatically operated
AUTOMATIC Rotary Plate Ø520
with APS 190 and 4 APS 160 automatic operation
Automatic or manual tooling fast set-up for Ø 400 turning workholding
- Pallet/Tooling fast set-up on turning spindles
- Positioning accuracy < 0,005 mm
- Case hardened main components to assure better accuracy and long life
- Pneumatic opening (OPEN) / Closing by spring + Turbo function
- Opening/closing automatically operated
AUTOMATIC Rotary Plate Ø650
with APS 190 and 4 APS 160 automatic operation
Automatic or manual tooling fast set-up for Ø 650-800 turning workholding
- Pallet/Tooling fast set-up on turning spindles
- Positioning accuracy < 0,005 mm
- Case hardened main components to assure better accuracy and long life
- Pneumatic opening (OPEN) / Closing by spring + Turbo function
- Opening/closing automatically operated
Rotary Plate accessories
Pneumatic rotating manifolds / Adaptors / Cover
Accessories available for Rotary Plates
- Pneumatic manifolds: 4 PNEUMATIC Feedings ROTATING MANIFOLD to use with standard RU 2-22 rotating joint
- Pneumatic manifolds: 3 PNEUMATIC Feedings ROTATING MANIFOLD for APS modules Automatic operation
- Adaptors FLANGE ISO-A: direct, reduction and increasing assembly
- Covers: magnet protection covers for 140 APS and 160 APS
- Covers: magnet protection covers for 190 APS and 250 APS
AUTOMATIC+3 FEEDINGS ROTARY PLATE
AUTOMATIC Rotary Plate Ø202
with 3 pneumatic feedings on pallet
with APS 190 automatic operation
Automatic or manual tooling fast set-up for Ø 170 and Ø 210 turning workholding
- Pallet/Tooling fast set-up on turning spindles
- 3 pneumatic feedings available on pallet
- Positioning accuracy < 0,005 mm
- Case hardened main components to assure better accuracy and long life
- Pneumatic opening (OPEN) / Closing by spring + Turbo function
- Opening/closing automatically operated
AUTOMATIC Rotary Plate Ø260
with 3 pneumatic feedings on pallet
with APS 250 automatic operation
Automatic or manual tooling fast set-up for Ø210-250 and Ø 315 turning workholding
- Pallet/Tooling fast set-up on turning spindles
- 3 pneumatic feedings available on pallet
- Positioning accuracy < 0,005 mm
- Case hardened main components to assure better accuracy and long life
- Pneumatic opening (OPEN) / Closing by spring + Turbo function
- Opening/closing automatically operated
AUTOMATIC Rotary Plate Ø330
with 3 pneumatic feedings on pallet
with 3 APS 140 automatic operation
Automatic or manual tooling fast set-up for Ø330 turning workholding
- Pallet/Tooling fast set-up on turning spindles
- 3 pneumatic feedings available on pallet
- Positioning accuracy < 0,005 mm
- Case hardened main components to assure better accuracy and long life
- Pneumatic opening (OPEN) / Closing by spring + Turbo function
- Opening/closing automatically operated
AUTOMATIC Rotary Plate Ø420
with 3 pneumatic feedings on pallet
with 4 APS 140 automatic operation
Automatic or manual tooling fast set-up for Ø330 turning workholding
- Pallet/Tooling fast set-up on turning spindles
- 3 pneumatic feedings available on pallet
- Positioning accuracy < 0,005 mm
- Case hardened main components to assure better accuracy and long life
- Pneumatic opening (OPEN) / Closing by spring + Turbo function
- Opening/closing automatically operated
AUTOMATIC Rotary Plate Ø520
with 3 pneumatic feedings on pallet
with APS 190 and 4 APS 160 automatic operation
Automatic or manual tooling fast set-up for Ø500 turning workholding
- Pallet/Tooling fast set-up on turning spindles
- 3 pneumatic feedings available on pallet
- Positioning accuracy < 0,005 mm
- Case hardened main components to assure better accuracy and long life
- Pneumatic opening (OPEN) / Closing by spring + Turbo function
- Opening/closing automatically operated
AUTOMATIC Rotary Plate Ø650
with 3 pneumatic feedings on pallet
with APS 190 and 4 APS 160 automatic operation
Automatic or manual tooling fast set-up for Ø500 turning workholding
- Pallet/Tooling fast set-up on turning spindles
- 3 pneumatic feedings available on pallet
- Positioning accuracy < 0,005 mm
- Case hardened main components to assure better accuracy and long life
- Pneumatic opening (OPEN) / Closing by spring + Turbo function
- Opening/closing automatically operated
Rotary Plate accessories
Pneumatic rotating manifolds / Adaptors / Cover
Accessories available for Rotary Plates
- Pneumatic manifolds: 4 PNEUMATIC Feedings ROTATING MANIFOLD to use with standard RU 2-22 rotating joint
- Pneumatic manifolds: 3 PNEUMATIC Feedings ROTATING MANIFOLD for APS modules Automatic operation
- Adaptors FLANGE ISO-A: direct, reduction and increasing assembly
- Covers: magnet protection covers for 140 APS and 160 APS
- Covers: magnet protection covers for 190 APS and 250 APS
AT-PM Automatic chuck change system
AT-PM 200/170
AUTOMATIC CHUCK CHANGE SYSTEM
AT-PM Automatic chuck change system 200/170
- Quick chucks change on lathe
- Quick chucks change Ø170 Ø210 Ø250 available diameter on lathe, quick connection to double cylinder between automatic feeding
- Pallet positioning accuracy pallet < 0,005 mm
- Hardened materials for high accuracy and durability
- AT-PM operation with hydraulic double cylinder
- Air sensing function for pallet positioning
AT-PM 240/220
AUTOMATIC CHUCK CHANGE SYSTEM
AT-PM Automatic chuck change system 200/170
- Quick chucks change on lathe
- Quick chucks change Ø210 Ø250 Ø315 available diameter on lathe, quick connection to double cylinder between automatic feeding
- Pallet positioning accuracy pallet < 0,005 mm
- Hardened materials for high accuracy and durability
- AT-PM operation with hydraulic double cylinder
- Air sensing function for pallet positioning
AT-PM 320/300
AUTOMATIC CHUCK CHANGE SYSTEM
AT-PM Automatic chuck change system 320/300
- Quick chucks change on lathe
- Quick chucks change Ø315 Ø400 Ø530 available diameter on lathe, quick connection to double cylinder between automatic feeding
- Pallet positioning accuracy pallet < 0,005 mm
- Hardened materials for high accuracy and durability
- AT-PM operation with hydraulic double cylinder
- Air sensing function for pallet positioning
AT-PM DOUBLE PISTON CYLINDERS
WITH 4 SAFETY VALVES FOR AT-PM CONTROL
Double piston cylinder with 4 way oil manifold for separate actuation of the 2 cylinders
- AT-PM actuation +TS and AP chucks
- AT-PM actuation + collets
- Pallet positioning accuracy pallet < 0,005 mm
- Pressure range 8 - 70 bar
- Horizontal or vertical installation
- Safety valves on the biggest cylinders and stroke control on each cylinder
Universal 2-3 Grippers
2PXS-N 2PXS-NSI 2PXS-NSE
N=normal stroke /SI=with springs ID /SE=with springs OD
Universal grippers normal stroke
2PXS-N 64 / 2PXS-NSI 64 / 2PXS-NSE 64
2 jaws self-centering grippers pneumatics protected
- Aluminium body to contain the gripper weight
- Functional parts heat-treated for high precision and long life
- Master jaws with calibrated bushings
- Protection class IP40
- Highest rigidity and Repeatability: 0,01 mm
- Prepared for Air purge
2PXS-L 2PXS-LSI 2PXS-LSE
L=long stroke /SI=with springs ID /SE=with springs OD
Universal grippers long stroke
2PXS-L 64 / 2PXS-LSI 64 / 2PXS-LSE 64
2 jaws self-centering grippers pneumatic and protected
- Aluminium body to contain the gripper weight
- Functional parts heat-treated for high precision and long life
- Master jaws with calibrated bushings
- Protection class IP40
- Highest rigidity and Repeatability: 0,01 mm
- Prepared for Air purge
2PXS-N 80 / 2PXS-NSI 80 / 2PXS-NSE 80
N=normal stroke /SI=with springs ID /SE=with springs OD
Universal grippers normal stroke
2 jaws self-centering grippers pneumatics protected
- Aluminium body to contain the gripper weight
- Functional parts heat-treated for high precision and long life
- Master jaws with calibrated bushings
- Protection class IP40
- Highest rigidity and Repeatability: 0,01 mm
- Prepared for Air purge
2PXS-L 80 / 2PXS-LSI 80 / 2PXS-LSE 80
L=long stroke /SI=with springs ID /SE=with springs OD
Universal grippers long stroke
2 jaws self-centering grippers pneumatic and protected
- Aluminium body to contain the gripper weight
- Functional parts heat-treated for high precision and long life
- Master jaws with calibrated bushings
- Protection class IP40
- Highest rigidity and Repeatability: 0,01 mm
- Prepared for Air purge
2PXS-N 100 / 2PXS-NSI 100 / 2PXS-NSE 100
N=normal stroke /SI=with springs ID /SE=with springs OD
Universal grippers normal stroke
2 jaws self-centering grippers pneumatics protected
- Aluminium body to contain the gripper weight
- Functional parts heat-treated for high precision and long life
- Master jaws with calibrated bushings
- Protection class IP40
- Highest rigidity and Repeatability: 0,01 mm
- Prepared for Air purge
2PXS-L 100 / 2PXS-LSI 100 / 2PXS-LSE 100
L=long stroke /SI=with springs ID /SE=with springs OD
Universal grippers long stroke
2 jaws self-centering grippers pneumatic and protected
- Aluminium body to contain the gripper weight
- Functional parts heat-treated for high precision and long life
- Master jaws with calibrated bushings
- Protection class IP40
- Highest rigidity and Repeatability: 0,01 mm
- Prepared for Air purge
2PXM-N 2PXM-NSI 2PXM-NSE
N=normal stroke /SI=with springs ID /SE=with springs OD
Universal grippers normal stroke
2PXM-N 125 / 2PXM-NSI 125 / 2PXM-NSE 125
2 jaws self-centering grippers pneumatics and protected
- Aluminium body to contain the gripper weight
- Functional parts heat-treated for high precision and long life
- Master jaws with calibrated bushings
- Protection class IP64
- Highest rigidity and Repeatability: 0,02 mm
- Prepared for Air purge
2PXM-L 2PXM-LSI 2PXM-LSE
L=long stroke /SI=with springs ID /SE=with springs OD
Universal grippers long stroke
2PXM-L 125 / 2PXM-LSI 125 / 2PXM-LSE 125
2 jaws self-centering grippers pneumatic and protected
- Aluminium body to contain the gripper weight
- Functional parts heat-treated for high precision and long life
- Master jaws with calibrated bushings
- Protection class IP64
- Highest rigidity and Repeatability: 0,02 mm
- Prepared for Air purge
2PXM-N 160 / 2PXM-NSI 160 / 2PXM-NSE 160
N=normal stroke /SI=with springs ID /SE=with springs OD
Universal grippers normal stroke
2 jaws self-centering grippers pneumatics and protected
- Aluminium body to contain the gripper weight
- Functional parts heat-treated for high precision and long life
- Master jaws with calibrated bushings
- Protection class IP64
- Highest rigidity and Repeatability: 0,02 mm
- Prepared for Air purge
2PXM-L 160 / 2PXM-LSI 160 / 2PXM-LSE 160
L=long stroke /SI=with springs ID /SE=with springs OD
Universal grippers long stroke
2 jaws self-centering grippers pneumatic and protected
- Aluminium body to contain the gripper weight
- Functional parts heat-treated for high precision and long life
- Master jaws with calibrated bushings
- Protection class IP64
- Highest rigidity and Repeatability: 0,02 mm
- Prepared for Air purge
2PXM-N 200 / 2PXM-NSI 200 / 2PXM-NSE 200
N=normal stroke /SI=with springs ID /SE=with springs OD
Universal grippers normal stroke
2 jaws self-centering grippers pneumatics and protected
- Aluminium body to contain the gripper weight
- Functional parts heat-treated for high precision and long life
- Master jaws with calibrated bushings
- Protection class IP64
- Highest rigidity and Repeatability: 0,02 mm
- Prepared for Air purge
2PXM-L 200 / 2PXM-LSI 200 / 2PXM-LSE 200
L=long stroke /SI=with springs ID /SE=with springs OD
Universal grippers long stroke
2 jaws self-centering grippers pneumatic and protected
- Aluminium body to contain the gripper weight
- Functional parts heat-treated for high precision and long life
- Master jaws with calibrated bushings
- Protection class IP64
- Highest rigidity and Repeatability: 0,02 mm
- Prepared for Air purge
2PXL-N 2PXL-NSI 2PXL-NSE
N=normal stroke /SI=with springs ID /SE=with springs OD
Universal grippers normal stroke
2PXL-N 250 / 2PXL-NSI 250 / 2PXL-NSE 250
2 jaws self-centering grippers pneumatics and protected
- Aluminium body to contain the gripper weight
- Functional parts heat-treated for high precision and long life
- Master jaws with calibrated bushings
- Protection class IP64
- Highest rigidity and Repeatability: 0,04 mm
- Prepared for Air purge
2PXL-L 2PXL-LSI 2PXL-LSE
L=long stroke /SI=with springs ID /SE=with springs OD
Universal grippers long stroke
2PXL-L 250 / 2PXL-LSI 250 / 2PXL-LSE 250
2 jaws self-centering grippers pneumatic and protected
- Aluminium body to contain the gripper weight
- Functional parts heat-treated for high precision and long life
- Master jaws with calibrated bushings
- Protection class IP64
- Highest rigidity and Repeatability: 0,04 mm
- Prepared for Air purge
3PXS-N 64 / 3PXS-NSI 64 / 3PXS-NSE 64
N=normal stroke /SI=with springs ID /SE=with springs OD
Universal grippers normal stroke
3 jaws self-centering grippers pneumatics and protected
- Aluminium body to contain the gripper weight
- Functional parts heat-treated for high precision and long life
- Master jaws with calibrated bushings and Protection class IP40
- OPTIONAL Inductive/Analogic stroke control sensor ON/OFF or linear
- OPTIONAL Magnetic stroke control sensor ON/OFF or linear and OPTIONAL Spring workstop
- Prepared for Air purge and Highest rigidity and Repeatability: 0,01 mm
3PXS-L 64 / 3PXS-LSI 64 / 3PXS-LSE 64
L=long stroke /SI=with springs ID /SE=with springs OD
Universal grippers long stroke
3 jaws self-centering grippers pneumatics and protected
- Aluminium body to contain the gripper weight
- Functional parts heat-treated for high precision and long life
- Master jaws with calibrated bushings and Protection class IP40
- OPTIONAL Inductive/Analogic stroke control sensor ON/OFF or linear
- OPTIONAL Magnetic stroke control sensor ON/OFF or linear and OPTIONAL Spring workstop
- Prepared for Air purge and Highest rigidity and Repeatability: 0,01 mm
3PXS-N 80 / 3PXS-NSI 80/ 3PXS-NSE 80
N=normal stroke /SI=with springs ID /SE=with springs OD
Universal grippers normal stroke
3 jaws self-centering grippers pneumatics and protected
- Aluminium body to contain the gripper weight
- Functional parts heat-treated for high precision and long life
- Master jaws with calibrated bushings and Protection class IP40
- OPTIONAL Inductive/Analogic stroke control sensor ON/OFF or linear
- OPTIONAL Magnetic stroke control sensor ON/OFF or linear and OPTIONAL Spring workstop
- Prepared for Air purge and Highest rigidity and Repeatability: 0,01 mm
3PXS-L 80 / 3PXS-LSI 80/ 3PXS-LSE 80
L=long stroke /SI=with springs ID /SE=with springs OD
Universal grippers long stroke
3 jaws self-centering grippers pneumatics and protected
- Aluminium body to contain the gripper weight
- Functional parts heat-treated for high precision and long life
- Master jaws with calibrated bushings and Protection class IP40
- OPTIONAL Inductive/Analogic stroke control sensor ON/OFF or linear
- OPTIONAL Magnetic stroke control sensor ON/OFF or linear and OPTIONAL Spring workstop
- Prepared for Air purge and Highest rigidity and Repeatability: 0,01 mm
3PXS-N 100 / 3PXS-NSI 100/ 3PXS-NSE 100
N=normal stroke /SI=with springs ID /SE=with springs OD
Universal grippers normal stroke
3 jaws self-centering grippers pneumatics and protected
- Aluminium body to contain the gripper weight
- Functional parts heat-treated for high precision and long life
- Master jaws with calibrated bushings and Protection class IP40
- OPTIONAL Inductive/Analogic stroke control sensor ON/OFF or linear
- OPTIONAL Magnetic stroke control sensor ON/OFF or linear and OPTIONAL Spring workstop
- Prepared for Air purge and Highest rigidity and Repeatability: 0,01 mm
3PXS-L 100/ 3PXS-LSI 100/ 3PXS-LSE 100
L=long stroke /SI=with springs ID /SE=with springs OD
Universal grippers long stroke
3 jaws self-centering grippers pneumatics and protected
- Aluminium body to contain the gripper weight
- Functional parts heat-treated for high precision and long life
- Master jaws with calibrated bushings and Protection class IP40
- OPTIONAL Inductive/Analogic stroke control sensor ON/OFF or linear
- OPTIONAL Magnetic stroke control sensor ON/OFF or linear and OPTIONAL Spring workstop
- Prepared for Air purge and Highest rigidity and Repeatability: 0,01 mm
3PXM-N 125 / 3PXM-NSI 125 / 2PXM-NSE 125
N=normal stroke /SI=with springs ID /SE=with springs OD
Universal grippers normal stroke
3 jaws self-centering grippers pneumatics and protected
- Aluminium body to contain the gripper weight
- Functional parts heat-treated for high precision and long life
- Master jaws with calibrated bushings and Protection class IP64
- OPTIONAL Inductive/Analogic stroke control sensor ON/OFF or linear
- OPTIONAL Magnetic stroke control sensor ON/OFF or linear and OPTIONAL Spring workstop
- Prepared for Air purge and Highest rigidity and Repeatability: 0,02 mm
Our Product categories
Inductive couplers thread
Inductive axial couplers
Mechatronic grippers
Pneumatic grippers - (2-finger-universal-gripper)
Pneumatic grippers - (3-finger-centric-gripper)
Sensors/Position Measuring
Inductive Sensors
Mechatronic products
Measuring systems
Software
Customizing
Accessories
Contact Us
- Tel. ติดต่อคุณภูรินทร์ 098-4288648 Email: sales@mechatronics.co.th
- Fax. LINE ID : 0984288648
- www.mechatronics.co.th
- จำนวนผู้เข้าชมเว็บไซต์ : 8,729,285
Copyright © mechatronics.co.th All Rights Reserved.