E-Catalog > PERFECT TECHNOLOGY CO.,LTD > BT spindle test bar BT pulling force Force Check BT30 BT40 BT50

PAGE VIEW : 1,943

Product Information :

Name :
BT spindle test bar BT pulling force Force Check BT30 BT40 BT50
Category :
  1. เครื่องจักร, อุปกรณ์เกี่ยวกับเครื่องจักร, เครื่องมือกล
Sub - Category :
  1. PERFECT TECHNOLOGY CO.,LTD
Brand :
Force Check BT30 BT40 BT50
Model :
Force Check BT30 BT40 BT50
Product Type :
  1. สินค้า, ผลิตภัณฑ์
Short Description :
BT spindle test bar BT pulling force Force Check BT30 BT40 BT50

Product Detail :

 Characteristic

Model : XXRG

Spindle dynamometer (spindle tension meter) BT30, BT40, BT50
※ Features: Hydraulic mechanical structure, high stability
※ Specifications Instructions:
1. Check if the tension gauge on the tension meter matches the four-claw gauge
Corresponding grid.
2. Tension meter and taper parts of the front spindle wipe clean,
Clamp tension meter can be.
3. Rally gauge pressure design: 1 kg / cm² = 10kg = 100 N
4. Taiwan's "SKUN" production of digital display, LCD hydraulic gauge

 Spindle tension count explicit

 

 

 

 

Spindle tension count explicit

Model

(Meas`uring range)

Package weight

XXRG-BT-30

0~250 Bar = 0~247KG

4.2kg

XXRG-BT-40

0~250 Bar = 0~247KG

4.3kg

XXRG-BT-50

0~400 Bar = 0~395KG

6.7kg

0.988Bar=1KG

Digital Rally Meter Operating Instructions:

1. boot display: After loading the battery, press and hold the power / unit key to display the current pressure value \

2. Pressure value to zero: When the pressure value is displayed, the zero button is pressed for three seconds, the pressure is zeroed.

3. Other proposed and set, see below.

Pressure gauge button function description:

A. Button Definition: There are three buttons on the pressure gauge panel

1. Power / Unit: The left button is - power / unit key

2. Backlight: The middle button is - Backlight

3. Zero button: The right button is - zero button

8. Parameter setting mode: At the same time, press and hold the backlight key, enter the parameter setting mode,

For details, see (3) Parameter setting mode.

C. Change the pressure unit: press the power / unit key click, that is, the current pressure unit change.

D. backlight switch: press the backlight key click, that is, turn on or off the backlight.

E. shows the maximum pressure value:

1. Press and hold the backlight key for three seconds, the LCD displays the maximum pressure value, and the "Max" pattern below the LCD flashes.

2. Press and hold the backlight key for 3 seconds, and return to normal working condition.

F. maximum pressure value zero:

In the state of displaying the maximum pressure value, press and hold the zero key for 3 seconds, the LCD will display "...." For 1 second, and the maximum pressure value will be zero.

G. Pressure value zero: Pressing the zero key for 3 seconds while the pressure value is displayed, the current pressure value is zero.

Parameter setting mode

A. The first item: zero mask setting

1. At the same time, press and hold the backlight key, enter the parameter setting mode.

2. Setting Mode The first item is to set the zero mask range, and the screen displays CUt.X.

3. Use the zero key to adjust the X number, X is 1-9.

B. second: shutdown time setting

1. Press the backlight key again, enter the setting mode The third is the shutdown time setting, the screen displays LCd.X.

2. Use the Zero key to adjust the number of X, X is 1-9.

C. Third: Turn off the backlight time setting

1. Press the backlight key again, enter the setting mode The third is to turn off the backlight time setting, the screen displays LEd.X.

2. Use the zero key to adjust the number of X, X is 1-9 D. The setting is completed - Save the setting:

1. Press the backlight key again, then the set value is memorized.

2. Then back to normal working status display

 

 

 

 


XXRG Spindle tension count explicit

 Characteristic

Model : XXRG

Spindle dynamometer (spindle tension meter) BT30, BT40, BT50
※ Features: Hydraulic mechanical structure, high stability
※ Specifications Instructions:
1. Check if the tension gauge on the tension meter matches the four-claw gauge
Corresponding grid.
2. Tension meter and taper parts of the front spindle wipe clean,
Clamp tension meter can be.
3. Rally gauge pressure design: 1 kg / cm² = 10kg = 100 N
4. Taiwan's "SKUN" production of digital display, LCD hydraulic gauge

 Spindle tension count explicit

 

 

 

 

Spindle tension count explicit

Model

(Meas`uring range)

Package weight

XXRG-BT-30

0~250 Bar = 0~247KG

4.2kg

XXRG-BT-40

0~250 Bar = 0~247KG

4.3kg

XXRG-BT-50

0~400 Bar = 0~395KG

6.7kg

0.988Bar=1KG

Digital Rally Meter Operating Instructions:

1. boot display: After loading the battery, press and hold the power / unit key to display the current pressure value \

2. Pressure value to zero: When the pressure value is displayed, the zero button is pressed for three seconds, the pressure is zeroed.

3. Other proposed and set, see below.

Pressure gauge button function description:

A. Button Definition: There are three buttons on the pressure gauge panel

1. Power / Unit: The left button is - power / unit key

2. Backlight: The middle button is - Backlight

3. Zero button: The right button is - zero button

8. Parameter setting mode: At the same time, press and hold the backlight key, enter the parameter setting mode,

For details, see (3) Parameter setting mode.

C. Change the pressure unit: press the power / unit key click, that is, the current pressure unit change.

D. backlight switch: press the backlight key click, that is, turn on or off the backlight.

E. shows the maximum pressure value:

1. Press and hold the backlight key for three seconds, the LCD displays the maximum pressure value, and the "Max" pattern below the LCD flashes.

2. Press and hold the backlight key for 3 seconds, and return to normal working condition.

F. maximum pressure value zero:

In the state of displaying the maximum pressure value, press and hold the zero key for 3 seconds, the LCD will display "...." For 1 second, and the maximum pressure value will be zero.

G. Pressure value zero: Pressing the zero key for 3 seconds while the pressure value is displayed, the current pressure value is zero.

Parameter setting mode

A. The first item: zero mask setting

1. At the same time, press and hold the backlight key, enter the parameter setting mode.

2. Setting Mode The first item is to set the zero mask range, and the screen displays CUt.X.

3. Use the zero key to adjust the X number, X is 1-9.

B. second: shutdown time setting

1. Press the backlight key again, enter the setting mode The third is the shutdown time setting, the screen displays LCd.X.

2. Use the Zero key to adjust the number of X, X is 1-9.

C. Third: Turn off the backlight time setting

1. Press the backlight key again, enter the setting mode The third is to turn off the backlight time setting, the screen displays LEd.X.

2. Use the zero key to adjust the number of X, X is 1-9 D. The setting is completed - Save the setting:

1. Press the backlight key again, then the set value is memorized.

2. Then back to normal working status display

 

 

 

 


XXR-BT Clamping Force Gauge

 Characteristic

Model : XXR-BT

Spindle Draw Bar force gauge
※ Product Features: Hydraulic mechanical structure, high stability
※ Specifications Instructions:
1. Verify pull force gauge bolt specifications on with four claw specifications correspond.
2. Rally and the front spindle taper portion wipe clean,
Rally to clamp.
3. In response to the specifications of each knife, pull range as follows:
4.Use the German WIKA oil pressure gauge

 Clamping Force Gauge

Clamping Force Gauge

Model

(Measuring range)

Package weight

XXR-BT-30

0~150 kg/cm²

4.2kg

XXR-BT-40

0~150 kg/cm²

4.3kg

XXR-BT-50

0~350 kg/cm²

6.7kg


 

a: Determine whether the internal preload is in a normal state before using

   Inspection methods: 

     1. Pointer is not at zero, and there is left pre-pressure

     2. Manually check the pressure gauge and the body will turn

         Not rotating means there is left pre-pressure. Otherwise, if it’s rotating, that means there is no pre-pressure.

b: Clamping Force Gauge restore the preload method

    1. Remove the B plug.

    2. Loosen the A lever and loosen it again.

    3. Push the A lever inwards (so that the oil level is reduced).

    4. Then R68 hydraulic oil from the B hole to fill, after the first plug into the plug.

    5. Then tighten the A lever, then C gauge pointer will move up.

       When the A-rod fully tightened when the pressure is the most appropriate indication should be between 10kg ~ 30kg, if more than 30kg, then the B plug will be unbeatable internal oil micro-oozed to adjust the internal pressure until the pressure the index showed in the range of 10kg ~ 30kg.

c: Clamping Force Gauge reading method

    The inner area of the tension meter 10.00875, so when the tension gauge pointer on the pressure data multiplied by 10, the correct tension

    Newtons = 98 kg relative to the Newton units shown in the Electronic Rallymeter.

   The unit of pressure shown in this product is 1 kg = 10 kg tension

d: Clamping Force Gauge of the rod to replace the way

    1. Clamp the surface of the pressure gauge

    2. Turn the A lever (B plug can not move)

    3. Replace the new lever and lock

    4.Once again check the preload, preload normal can continue to use


55HG-BT Test Bar

 Characteristic

Model : 55HG-BT

Test arbor is used to measure the runout of machine spindle.
Taper Contant > 85%

 Test Bar

 

                Test Bar

 

Item No.

D

L

Roundness 

Concentricity

Weight(KG)

55HG-BT30

30

250

< 0.003

<0.005

3.5kg

55HG-BT40

40

300

4.7kg

55HG-BT50

50

300

6.5kg


 

 

 

 

 

 

 

 


5HG-BT Test Bar

 Characteristic

Model : 55HG-BT

Test arbor is used to measure the runout of machine spindle.
Taper Contant > 85%

 Test Bar

 

                Test Bar

 

Item No.

D

L

Roundness 

Concentricity

Weight(KG)

55HG-BT30

30

250

< 0.003

<0.005

3.5kg

55HG-BT40

40

300

4.7kg

55HG-BT50

50

300

6.5kg


 

 

 

 

 

 

 

 



Other Product In Group "PERFECT TECHNOLOGY CO.,LTD (1)"