PAGE VIEW : 3,395

Product Information :

Name :
Indicator
Category :
  1. เครื่องจักร, อุปกรณ์เกี่ยวกับเครื่องจักร, เครื่องมือกล
Sub - Category :
  1. DACELL Loadcell Torque sensor
Brand :
DACELL
Product Type :
  1. สินค้า, ผลิตภัณฑ์

Product Detail :

Indicator

SM110, SM150

SM110, SM150

Indicator

YJ320T

YJ320T

 

Indicator

Truck scale Program

Truck scale Program

 

Indicator

DN711P

DN711P

 

Graphic touch indicator - DN-GI200, GI100

list

. Grapic Indicator-Color Graphic LCD Touch Screen.
. Diverse of Load Control Mode.
DN-GI100: 1ch indicator (load cell)
                -High sampling speed , 4,000/1sec

DN-GI200: 2ch indicator (CH1 :load cell,CH2:Distance Sensor)
               - High Sampling Speed: 2,000/1sec.(per 1ch )

catalog

catalog

qna

 

gi drawing.jpg 

 

SpecificationsDN-GI200,  GI100
Sensor EXC            A-CH (load cell):DC 10/5V,120mA,                         B-CH : B-CH(Distance Sensor)
Input Signal Range            A-CH ;0~±40mA,                                                  B-CH :0 ~±10V,4~20mA,0~20mA
Conversion Speed            A-CH : 4,000times/sec.                                          B-CH : 2000/sec
Non-linearity            A-CH : ±0.02% F.S +1digit,                                    B-CH : ±0.02% F.S+1digit
Input Sensitivity            A-CH :1.0㎶/Digit,                                                   B-CH :1.0mV/Digit (0~10V)
Input Impedance            A-CH 10Mohm                                                       B-CH :1 Mohm / 50ohm
Temperature Factor. ±0.005% of rdg +0.5 digit/℃
Analogue Filter 10,30,300,600 Hz
Digit 0~±99999
Circumstance 0~40℃
Power AC 100~240V, 50/60Hz
Consumed Power Around 32VA
Output

                        Standard : Relay Output (HH,HI,GO,LO,LL)                                                    

                        OPTION:1.RS-232C serial output
                                      2.RS-485 serial output
                                      3.±0~10V or 4~20mA Analogue output
                                      4.BCD parallel output
                                      5.SD memory card

Display Window STN color LCD, 74(W)×55(H)mm

 

Pocket indicator - DN120

list

  • The DN-120 has designed specifically to operate with strain gauge sensors such as Fast-measurement of Load cell, Pressure Transducer,LVDT, etc.
  • The setup sequence is simple and quick using four push buttons only. Quick sampling speed (100 times/sec).

catalog

catalog

qna

 

Feature

  • Simple outdoor using in use of battery.
  • Using rechargeable battery.
  • High resolving power(16bit A/D)
  • High precision(more than 0.012% F.S) and stability.
  • Quick sampling speed (100 times/sec)
  • Peak hold function
  • Comparison function ; open collector output
  • Calibration of actual load and sensor output value
  • Auto zero function
  • Cutting size:92×92mm - Weight:about 500g

Others

  • Option : RS232C(OP-01), RS485(OP-02), Comparison output (hi, Low)(Op-03), Peak/Sample Hold(OP-04), Back light(OP-05).

SPECIFICATIONS

SpecificationsAccuracy
Application sensor Strain guage sensor
Sensor adjustment range DC 5V
Zero adjustment range 100% F.S (auto zero)
Input signal 1.0, 1.5, 2, 3mV/V (Dip switch)
Display 0000~±19999
Display speed Approx 30times/sec (Adjustment available by buff setting)
Character height 7Segment 15mm
Decimal point Random setting available
Sampling speed Max 100times/sec
Zero variation within 0.01%/℃ (1mV/V)
Sensitivity variation within 0.01%/℃
Usage temperature range -10~60℃
Humidity less than 80% RH (no des condensation)
Power source used DC 7.2V Recharging battery DC 12V Adapter

DIMENSIONS

 

Pocket indicator - PDN20

list

 The PDN-20 has been designed specifically to operate with strain gauge sensors such as Load cell, Pressure Transducer. LVDT. etc.

Pocket indicator with rechargeable battery.
PEAK HOLD FUNCTION
NG, OK judgments with LED display(with open collector output)
Connectable to computer through USB output cable 
Display reverse function.
Ergonomic, heavy-duty metal construction
UNIT CONVERSION : N, kgf, lbf ,ozf

catalog

catalog

qna

 

Dimensions

PDN20.png

Specification

 

SpecificationsAccuracy
Usable Sensor Strain gauge type sensor (Bridge  350Ω, 700Ω)
Range of Indication -99999 ~ +99999
A/D Transducer 16bit , 100times/sec
D/A Transducer 12bit
Indication of Measuring Value 5 Digit LCD ( Right/reverse display available)
Measuring Unit kgf , N , lbf , ozf
Condition indicating LED Indication of charge and compare output condition
Compare Output High, Low, Good
Analog Output DC ± 1V
Communication Output USB RS232
Range of using temperature -10℃ ~ 40℃, less than 80% RH (no dew condensation)
Weight  Approximately 800g
Power Nickel hydrogen (NimH), Chargeable Adapter (DC 9V)
Continuous Use Life Approximately 40 hours
Charging Time Approximately 8 hours
Standard components AC Chargeable Adapter Handy case
Option 1. USB cable    2. Connector for analog output and relay output

 

Pocket indicator - PDN10

list

  • Pocket indicator with battery. 
  • The PDN-10 has been designed specifically to operate with strain gauge sensors such as Load cell, Pressure Transducer. LVDT. etc. 
  • Peak hold
  • Auto Zero
  • Measuring Data Saving (Max 500pcs.)
  • Hi, Low Display LED

 

catalog

catalog

qna

 

SPECIFICATIONS

SpecificationsAccuracy
Power Source DC 9V battery
Electric current Consumption 15mA
LOAD CELL input range 1.0mV/V ~ 3.0mV/V, Potenticmeter : 100~10KΩ
Display 4 1/2 Digit LCD
Characters displayed +19999
Display Speed Approx. 10 times/sec
Decunak point Position 0, 0.0, 0.00, 0.000
A/D Sampling speed 100 times/sec
A/D Resolution 16 bit
Zero Adjust Range 100% F.S(AUTO ZERO)
Data stonage 500 data can be memorised
Data output RS232C Serial Interface

DIMENSIONS

 

Digital indicator - DN-130T

list

These indicators can use Torque and RPM measurement at the same time. Digital display and analog output, comparison output are available.

catalog

catalog

qna

 

Feature

  • Torque, RPM simultaneous measurement
  • High resolution (24bit ADC, 16bit DAC)
  • High precision (more than 0.012% F.S) and stability
  • Upper and lower limit comparison output (Torque, RPM)
  • analog output (Torque, RPM)
  • UNIT CONVERSION : kg, N, ℓb, kg/㎠, bar, MPa
  • Quick sampling speed (1000times/sec)
  • Watch dog
  • Calibration of actual load and sensor output value
  • Display part and analogue zero by auto zero (DAC)
  • Analog out (DAC)

Option

  • OP-02 : RS232C serial interface
  • OP-03 : RS485 Multi drop interface

SPECIFICATIONS

SpecificationsAccuracy
DN130TDN230A
Application sensor Torque : Brush type torquemeter
RPM : Proximity sensor (MP981)
Torque : Brushless type torquemeter (trC)
RPM : Proximity sensor (MP981)
Sensor authorized voltage Torque : DC 5V
RPM : DC 12V
Torque : DC 2Vrms, 5kHz
RPM : DC 12V
Zero adjustment range Torque : 100% F.S (Auto Zero)
Input signal Torque : 0.5 ~ 3mV/V
RPM : DC 12V
Torque : 0.5 ~ 2mV/V
RPM : 1 ~ 350 pulse/circle
Display Torque : -19999 ~ +99999
RPM : 0 ~ 60000
Character height 7 segment LED 14mm
A/D converter Torque 24bit 1000 times/sec
D/A converter Torque 16bit
Zero variation Torque Witdin 0.5㎶/℃
Sensitivity Torque Witdin 0.01%/℃
Voltage output DC 0 ~ 10V (4~20mA : in accordance witd customer request)
Contact capacity AC 250V 5A
Relay life time More tdan 5,000,000 times
Usage temperature range -10℃ ~ 60℃
Humidit Less tdan 80% RH (No dew condensation)
Power source used AC85 ~ 265V 50/60Hz
Dimensions 97 X 97 X 141mm
Cutting size 92.5 X 92.5mm
Weight About 1000g

DIMENSIONS

Digital indicator - DN150,250

list

The DN-100 and DN200 have designed specifically to operate with strain gauge sensors such as Fast - measurement of Loadcell, Torquemeters, Pressure Transducer, LVDT, etc,.

ㆍDN150 : sampling speed : Appr. 5000Times Per Second
ㆍDN250 : sampling speed : Appr. 1000Times Per Second

catalog

catalog

qna

 

 

Feature

  • High resolution
  • High precision (more than 0.01% F.S) and stability
  • Relay output : Hi, Low, NG, OK.
  • UNIT CONVERSION : kg, N, ℓb, kg/㎠, bar, MPa
  • Display part and analogue zero by auto zero
  • Calibration of actual load and sensor output value
  • Peak & sample hold
  • Watch dog

OPTION

  • OP-01 : BCD paralle out
  • OP-02 : RS232C serial interface
  • OP-03 : RS485 Multi drop interface

 

Specifications

SpecificationAccuracy
Application sensor Strain guage sensors
Sensor authorized voltage
(the number of Loadcell connection)
DC 5V, Loadcell(350?) available 4
Zero adjustment range 100%F·S (Auto Zero)
Input signal 0.5~3mV/V
Display -19999~+99999
Character height 7 Segment 14mm
Decimal point Random setting available
A/D converter DN150 : 16bit 5000 times/sec
DN250 : 24bit 1000 times/sec
D/A converter 16bit 1000 times/sec
Relay output Contact capacity : AC 250V 5A, Relay life time : more than 5,000,000 times
Zero variation Within 0.5μV/℃
Sensitivity variation Within 0.01%/℃
Voltage output DC 0 ~ 10V (4~20mA : in accordance with customer request)
Usage temperature range -10℃ ~ 60℃
Humidity Less than 80% RH (no dew condensation)
Power source used AC 85 ~ 265V 50/60Hz
Weight 1000g
Option
  • OP-01 : BCD output
  • OP-02 : RS232C serial interface
  • OP-03 : RS485 Multi drop interface
  • OP-04 : RS422A serial interface
  • OP-06:  Power 24VDC

제품치수 (unit:mm)

 

Digital indicator - DN40W

list

The DN-40W has designed specifically to operate with strain gauge sensors such as Fast - measurement of Loadcell, Pressure Transducer, LVDT, etc.

Option: Power Input 24V in accordance with customer request

catalog

catalog

qna

 

Feature

  • High resolution (24bit ADC)
  • High precision (more than 0.01% F.S) and stability
  • Quick sampling speed (1000times/sec)
  • Relay output : Hi, Low, NG, OK.
  • UNIT CONVERSION : kg, N, ℓb, kg/㎠, bar, MPa
  • Display part and analogue zero by auto zero
  • Dynamic analog out 
  • Built-in Shunt calibration switch
  • Peak & sample hold

OPTION

    • OP-01 : BCD paralle out
    • OP-02 : RS232C serial interface
    • OP-03 : RS485 Multi drop interface

Specifications

 

SpecificationsAccuracy
Application sensor Strain guage sensor (350Ω or 700Ω)
Sensor authorized voltage
(the number of Loadcell connection)
DC 5V, Loadcell(350Ω) available 4
Zero adjustment range 100% F·S (Auto Zero)
Input signal 0.5 ~ 3.0mV/V
AD converter 24bit 1000times/sec
Answering frequency DC ~ 10kHz (-3dB)
Display -19999 ~ +99999
Display speed Appox. 32times/sec
Character height 7Segment 14mm
Decimal point Random setting available
Sampling speed Max 1000 times/sec
Zero variation within 0.5μV/℃
Sensitivity variation 50ppm/℃
Voltage output 0 ~ 10V
(4~20mA : in accordance with customer request)
Usage temperature range -10℃ ~ 60℃
Humidity less than 80% RH (no dew condensation)
Power source used AC 220V 50/60Hz
Relay output Contact capacity : AC 250V 5A
Relay life time : more than 5,000,000 times

 

 

Digital indicator - DN50W

list

  • The DN-50W has designed specifically to operate with strain gauge sensors such as Fast - measurement of Loadcell, Pressure Transducer, LVDT, etc. The setup sequence is simple and quick using four push buttons only.
  • And comparison output are available.
  • Sampling speed : Appir. 1000Times Per Second
  • Option: Power Input 24V in accordance with customer request

catalog

catalog

qna

 

Feature

  • High resolution (24bit ADC, 16bit DAC)
  • High precision (more than 0.01% F.S) and stability
  • Quick sampling speed (1000times/sec)
  • Relay output : Hi, Low, NG, OK.
  • UNIT CONVERSION : kg, N, ℓb, kg/㎠, bar, MPa
  • Display part and analogue zero by auto zero
  • Analog Peak Hold
  • Small Size (96×48×128mm)
  • Built-in Shunt calibration switch
  • Peak & sample hold
  • Watch dog

OPTION

  • OP-01 : BCD paralle out
  • OP-02 : RS232C serial interface
  • OP-03 : RS485 Multi drop interface

SPECIFICATIONS

SpecificationsAccuracy
Application sensor Strain guage sensor (350Ω or 700Ω)
Sensor authorized voltage
(the number of Loadcell connection)
DC 5V, Loadcell(350Ω) available 4
Zero adjustment range 100% F·S (Auto Zero)
Input signal 0.5 ~ 3.0mV/V
AD converter 24bit 1000times/sec
DA converter 16bit 1000 times/sec
Display -19999 ~ +99999
Display speed Appox. 32times/sec
Character height 7Segment 14mm
Decimal point Random setting available
Sampling speed Max 1000 times/sec
Zero variation within 0.5μV/℃
Sensitivity variation 50ppm/℃
Voltage output 0 ~ 10V
(4~20mA : in accordance with customer request)
Usage temperature range -10℃ ~ 60℃
Humidity less than 80% RH (no dew condensation)
Power source used AC 85 ~ 265V 50/60Hz
Relay output Contact capacity : AC 250V 5A
Relay life time : more than 5,000,000 times

DIMENSIONS

Digital indicator - DN10W, DN15W

list

 
 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Digital weighing indicator

DN711P

DN711P

 

Digital weighing indicator - DN5600

 
 

 SD memory Card built in / Compact size 
Industrial Control Application with Printing
   - Limit / Packer / Checker / Hopper / Testing
  6pcs Control Relay built in
  A/D Sampling : 200times/sec
  Peak / Sample / Average Hold Function
  Display Resolution : 1/30,000
  Various Options

 

 

 

 

 

DN5600 Application Relay Mode
   

 

General Specification

Input Sensitivity

0.2㎶ / Digit

Load Cell Excitation

DC 10V ( - 5V ~ + 5V )

Max. Signal Input Voltage

Max.32mV

Temperature Coefficient

[Zero] ±20PPM/℃ / [Span] ±20PPM/℃

Input Noise

±0.6㎶ P.P

Input Impedance

Over 10㏁

A/D Conversion Method

Sigma-Delta

A/D Resolution(Internal)

520,000 Count(19bit)

A/D Sampling Rate

Max. 200times / Sec

Non-Linearity

0.01% FS

Display Resolution(External)

1/30,000

 

Display Part

Display

Parts

Specification

Display

Main Display

7Segments, 6 Digit RED FND Display

Size :20.0mm(H)×13 mm(W)

Min. Division

×1, ×2, ×5, ×10, ×20, ×50

Max. display value

999,950

Under Zero value

"-" (Minus display)

Status lamp

Steady, Zero, Tare, SP1. SP2, SP3, SP4, RTxD

Green color Condition display Lamp (8pcs)

K e y

Number, Function Key 

Number Key, Function (16pcs) 

 

- Option

Option No.1

0~10V (Analogue Output)

Option No.2

4~20mA (Analogue Output)

Option No.3

RS422/485(Serial interface)

Option No.4

BCD Input

Option No.5

BCD Output

 
 

Digital weighing indicator - DN550N

list

  • Application of Packer MULTIPLE Ingredient BATCHING SCALE, etc.
  • 2 Step Control (DRIB, FINAL)
  • 6 Control RELAY (FINAL, DRIB, FINISH, BATCH FINISH, ZERO)
  • RELAY output mode
  • 7PIN TERMINAL : FINAL, DRIB, FINISH, BATCH FINISH, ZERO
  • 25PIN CONNECTOR : 8PIN CONTROL
  • BCD INPUT : 25PIN CONNECTOR

catalog

 

qna

 

SPECIFICATIONS

SpecificationsAccuracy
Load cell excitation 10VDC±5%, 320mA
Input Sensitivity 0.45㎶/D
Zero adjustment range -0.6mV~42mV : combinations of 6bit dip switch
Inputvoltage Max. 32mV
impedance 10㏁ (Min.)
noise 0.6㎶p.p or Less
A/D converter type : dual slope type
resolution : 1/65,000 counts(16bits)
converting speed : 20times/sec
Non-linearity 0.01% of full scale
Temperature-drift zero ±20PPM/℃
span ±20PPM/℃
Overload tolerance 10% of full capacity
Display update rate 20 times/sec

DIGITAL SECTION

SpecificationsAccuracy
Display unit 12.7mm(1/2"), 7digits
highly bright fluorescent tube
sub display : 7segment 12digit Red-FND
size : 9.2(H)x4.8(W)mmx1line
Annunciators steady, zero, tare, gross, auto, print, hold
Decimal point position 0, 0.0, 0.00, 0.000
Keyboard ten key, zero, tare, tare reset, print, gross/net, grand total,
sub total, parts, number, hold, reset, auto, code, s/n&enter
DN510A : run, standby, sp1, sp2, sp3, sp4
External input signal opical-isolator
min. Division x1, x2, x5, x10, x20, x50
max. Display +550,000
Rear panel Loadcell input : 5pin connector
Remote control : 5pin input terminal (start, stop, tare, tare reset, zero)
BCD input : 37pin connector
C ontrol relay : 7pin terminal (final, drib, finish, batch finish, zero)
25pin : connector : 8pin control

GENERAL

SpecificationsAccuracy
Data memory back-up appr. 10year
Power 100/117/120/220/240V AC, ±10%, 50/60㎐ (factory preset)
Power consumption appr. 30VA
Operating condition temperature : -10~40℃ (14~104℉)
humidity : 85% Rh Max. (non-condensing)
Net weight 2.4kg
Gross weight 3.1kg
Physical dimensions (WxDxH) 200x175x105mm / (WxDxH) 7.87x6.89x4.33inch
Fuse 250V/1A

 

Option

  • Printer I/F : Centronics Parallel
  • Analod Out : V - out(0~10V)
  • Analod Out : I - out(4~20mA)
  • Serial I/F : RS 422, RS485
  • BCD Out-put

 

DIMENSIONS

Applications

 

Digital weighing indicator - DN500N

list

  • Platform scale, Truck scale,
  • Tension/compression tester, Horse weigher,etc.
  • 50 kind of parts number can be memorized
  • Watch-dog function installed for diagnostics
  • Data back up against power stoppage.
  • Front display window covered by lexan film for the protecting of dust
  • Weighing judgment by over & under setting when printer is connected
  • Three kinds of hold function (peak-hold and averagehold, auto-hold)
  • Can drive up to 8pcs of load cell (350.)
  • RS-232C and CURRENT LOOP standard installed

catalog

catalog

qna

 

SPECIFICATIONS

SpecificationsAccuracy
Load cell excitation 10VDC±5%, 320mA
Input Signal 0.5 ~ 3.0mV/V
A/D converting speed 200times/sec
A/D converter resolution 1/520,000 counts(19bits), Δ∑
Non-linearity 0.01% of full scale
Zero adjustment range -0.6mV~42mV
Display Unit 7 segment, 20.0mm(H)×13.0(W)mm
Annunciator steady, zero, tare, gross, auto, print, hold,Interface
Decimal point position 0, 0.0, 0.00, 0.000
Keyboard Number key and function key 16 PCS.
Temperature-drift zero ±20PPM/℃, span ±20PPM/℃
Non-linearity 0.01% of full scale
Rear panel Loadcell input : 5pin connector
External control : 12pin input terminal
(zero, tare,tare reset/hold/print, gross/hold reset/subprint,Current loop, RS232C)
Power SMPS Free Voltage (85V~265V)

 

Option

  • Analog Out-put (V-out) : 0~10V
  • Analog Out-put (I-out) : 4~20mA
  • Serial I / F : RS-422, RS-485
  • BCD In-put
  • BCD In-out
  • RS3232C and Current loop : Standard Installed

 

DIMENSIONS

 

Digital weighing indicator - DN510N

list

  • Control for PACKER, FILLER, HOPPER
  • CHECKER, LIMIT SCALE etc.
  • Totaling function by Parts.(50 parts)
  • 4 Step control (SP1, SP2, SP3, SP4)
  • 6 control relay built-in (SP1, SP2, SP3, SP4, FINISH, NEAR ZERO)
  • Various Relay output mode (LIMIT, PACKER,  CHECKER1, CHECKER2)
  • Improved A/D Conversion speed and resolution(Max. 200times, 1/520,000)

catalog

catalog

qna

 

SPECIFICATIONS

SpecificationsAccuracy
Load cell excitation 10VDC±5%, 320mA
Input Signal 0.5 ~ 3.0mV/V
A/D converting speed 200times/sec
A/D converter resolution 1/520,000 counts(19bits), Δ∑
Non-linearity 0.01% of full scale
Zero adjustment range -0.6mV~42mV
Display Unit 7 segment, 20.0mm(H)×13.0(W)mm
Annunciator steady, zero, tare, gross, auto, print, hold,Interface
Decimal point position 0, 0.0, 0.00, 0.000
Keyboard Number key and function key 12 PCS.
Temperature-drift zero ±20PPM/℃, span ±20PPM/℃
Non-linearity 0.01% of full scale
Rear panel Loadcell input : 5pin connector
External control : 12pin input terminal
(zero, tare,tare reset/hold/print, gross/hold reset/subprint,Current loop, RS232C)
control relay output : 7pin terminal
Power SMPS Free Voltage (85V~265V)

DIMENSIONS

 

Digital weighing indicator - DN530N

list

  • Application of Packer, Filler, Hopper, Checker, Limit Scale, etc.
  • Totaling function by Parts.(50 parts)
  • 2 Step Control (SP1, SP2)
  • 6 Control RELAY according to MODE
  • LIMIT, PACKER MODE: (SP1, SP2, FINISH, UNDER NG, OVER NG, ZERO)
  • CHECKER MODE 1, 2, 3 : (SP1[LOW], SP2[HIGH], OK, NG, ZERO)
  • RELAY OUTPUT MODE: LIMIT, PACKER, CHECKER
  • Improved A/D Conversion speed and resolution(Max. 200times, 1/520,000)

catalog

catalog

qna

 

SPECIFICATIONS

SpecificationsAccuracy
Load cell excitation 10VDC±5%, 320mA
Input Signal 0.5 ~ 3.0mV/V
A/D converting speed 200times/sec
A/D converter resolution 1/520,000 counts(19bits), Δ∑
Non-linearity 0.01% of full scale
Zero adjustment range -0.6mV~42mV
Display Unit 7 segment, 20.0mm(H)×13.0(W)mm
Annunciator steady, zero, tare, Run, SP1, SP2, hold, Interface
Decimal point position 0, 0.0, 0.00, 0.000
Keyboard Number key and function key 12 PCS.
Temperature-drift zero ±20PPM/℃, span ±20PPM/℃
Non-linearity 0.01% of full scale
Rear panel Loadcell input : 5pin connector
External control : 12pin input terminal
(zero, tare, tare reset/hold/print, gross/hold reset/subprint, Current loop,RS232C)
control relay output : 7pin terminal
Power SMPS Free Voltage (85V~265V)

 

Option

  • Analog Out-put (V-out) : 0~10V
  • Analog Out-put (I-out) : 4~20mA
  • Serial I / F : RS-422, RS-485
  • BCD In-put
  • BCD In-out
  • RS3232C and Current loop : Standard Installed

 

DIMENSIONS

 

 

Pocket indicator

DN120

DN120

 

Explosion proof indicator

Explosion proof indicator_EXP-SB4P

EXP-SB4P

 

Pocket indicator - PDN10

list

  • Pocket indicator with battery. 
  • The PDN-10 has been designed specifically to operate with strain gauge sensors such as Load cell, Pressure Transducer. LVDT. etc. 
  • Peak hold
  • Auto Zero
  • Measuring Data Saving (Max 500pcs.)
  • Hi, Low Display LED

 

catalog

catalog

qna

 

SPECIFICATIONS

SpecificationsAccuracy
Power Source DC 9V battery
Electric current Consumption 15mA
LOAD CELL input range 1.0mV/V ~ 3.0mV/V, Potenticmeter : 100~10KΩ
Display 4 1/2 Digit LCD
Characters displayed +19999
Display Speed Approx. 10 times/sec
Decunak point Position 0, 0.0, 0.00, 0.000
A/D Sampling speed 100 times/sec
A/D Resolution 16 bit
Zero Adjust Range 100% F.S(AUTO ZERO)
Data stonage 500 data can be memorised
Data output RS232C Serial Interface

DIMENSIONS

 

Pocket indicator - PDN20

list

 The PDN-20 has been designed specifically to operate with strain gauge sensors such as Load cell, Pressure Transducer. LVDT. etc.

Pocket indicator with rechargeable battery.
PEAK HOLD FUNCTION
NG, OK judgments with LED display(with open collector output)
Connectable to computer through USB output cable 
Display reverse function.
Ergonomic, heavy-duty metal construction
UNIT CONVERSION : N, kgf, lbf ,ozf

catalog

catalog

qna

 

Dimensions

PDN20.png

Specification

 

SpecificationsAccuracy
Usable Sensor Strain gauge type sensor (Bridge  350Ω, 700Ω)
Range of Indication -99999 ~ +99999
A/D Transducer 16bit , 100times/sec
D/A Transducer 12bit
Indication of Measuring Value 5 Digit LCD ( Right/reverse display available)
Measuring Unit kgf , N , lbf , ozf
Condition indicating LED Indication of charge and compare output condition
Compare Output High, Low, Good
Analog Output DC ± 1V
Communication Output USB RS232
Range of using temperature -10℃ ~ 40℃, less than 80% RH (no dew condensation)
Weight  Approximately 800g
Power Nickel hydrogen (NimH), Chargeable Adapter (DC 9V)
Continuous Use Life Approximately 40 hours
Charging Time Approximately 8 hours
Standard components AC Chargeable Adapter Handy case
Option 1. USB cable    2. Connector for analog output and relay output

 

Pocket indicator - DN120

list

  • The DN-120 has designed specifically to operate with strain gauge sensors such as Fast-measurement of Load cell, Pressure Transducer,LVDT, etc.
  • The setup sequence is simple and quick using four push buttons only. Quick sampling speed (100 times/sec).

catalog

catalog

qna

 

Feature

  • Simple outdoor using in use of battery.
  • Using rechargeable battery.
  • High resolving power(16bit A/D)
  • High precision(more than 0.012% F.S) and stability.
  • Quick sampling speed (100 times/sec)
  • Peak hold function
  • Comparison function ; open collector output
  • Calibration of actual load and sensor output value
  • Auto zero function
  • Cutting size:92×92mm - Weight:about 500g

Others

  • Option : RS232C(OP-01), RS485(OP-02), Comparison output (hi, Low)(Op-03), Peak/Sample Hold(OP-04), Back light(OP-05).

SPECIFICATIONS

SpecificationsAccuracy
Application sensor Strain guage sensor
Sensor adjustment range DC 5V
Zero adjustment range 100% F.S (auto zero)
Input signal 1.0, 1.5, 2, 3mV/V (Dip switch)
Display 0000~±19999
Display speed Approx 30times/sec (Adjustment available by buff setting)
Character height 7Segment 15mm
Decimal point Random setting available
Sampling speed Max 100times/sec
Zero variation within 0.01%/℃ (1mV/V)
Sensitivity variation within 0.01%/℃
Usage temperature range -10~60℃
Humidity less than 80% RH (no des condensation)
Power source used DC 7.2V Recharging battery DC 12V Adapter

DIMENSIONS

 

Graphic touch indicator

DN-GI200, GI100

DN-GI200, GI10

 

Overload limiter

DN9000

DN9000

 

Digital tachometer/rpm sensor maget type

 

 

 

 

 
 
 

※ Serial Interface (RS-232C) or Current Loop is Standard installed with 1 port.

 

 

 

 

 


Digital weighing indicator

DN711P

DN711P

 

Digital weighing indicator - DN5600

 
 

 SD memory Card built in / Compact size 
Industrial Control Application with Printing
   - Limit / Packer / Checker / Hopper / Testing
  6pcs Control Relay built in
  A/D Sampling : 200times/sec
  Peak / Sample / Average Hold Function
  Display Resolution : 1/30,000
  Various Options

 

 

 

 

 

DN5600 Application Relay Mode
   

 

General Specification

Input Sensitivity

0.2㎶ / Digit

Load Cell Excitation

DC 10V ( - 5V ~ + 5V )

Max. Signal Input Voltage

Max.32mV

Temperature Coefficient

[Zero] ±20PPM/℃ / [Span] ±20PPM/℃

Input Noise

±0.6㎶ P.P

Input Impedance

Over 10㏁

A/D Conversion Method

Sigma-Delta

A/D Resolution(Internal)

520,000 Count(19bit)

A/D Sampling Rate

Max. 200times / Sec

Non-Linearity

0.01% FS

Display Resolution(External)

1/30,000

 

Display Part

Display

Parts

Specification

Display

Main Display

7Segments, 6 Digit RED FND Display

Size :20.0mm(H)×13 mm(W)

Min. Division

×1, ×2, ×5, ×10, ×20, ×50

Max. display value

999,950

Under Zero value

"-" (Minus display)

Status lamp

Steady, Zero, Tare, SP1. SP2, SP3, SP4, RTxD

Green color Condition display Lamp (8pcs)

K e y

Number, Function Key 

Number Key, Function (16pcs) 

 

- Option

Option No.1

0~10V (Analogue Output)

Option No.2

4~20mA (Analogue Output)

Option No.3

RS422/485(Serial interface)

Option No.4

BCD Input

Option No.5

BCD Output

 
 

Digital weighing indicator - DN550N

list

  • Application of Packer MULTIPLE Ingredient BATCHING SCALE, etc.
  • 2 Step Control (DRIB, FINAL)
  • 6 Control RELAY (FINAL, DRIB, FINISH, BATCH FINISH, ZERO)
  • RELAY output mode
  • 7PIN TERMINAL : FINAL, DRIB, FINISH, BATCH FINISH, ZERO
  • 25PIN CONNECTOR : 8PIN CONTROL
  • BCD INPUT : 25PIN CONNECTOR

catalog

 

qna

 

SPECIFICATIONS

SpecificationsAccuracy
Load cell excitation 10VDC±5%, 320mA
Input Sensitivity 0.45㎶/D
Zero adjustment range -0.6mV~42mV : combinations of 6bit dip switch
Inputvoltage Max. 32mV
impedance 10㏁ (Min.)
noise 0.6㎶p.p or Less
A/D converter type : dual slope type
resolution : 1/65,000 counts(16bits)
converting speed : 20times/sec
Non-linearity 0.01% of full scale
Temperature-drift zero ±20PPM/℃
span ±20PPM/℃
Overload tolerance 10% of full capacity
Display update rate 20 times/sec

DIGITAL SECTION

SpecificationsAccuracy
Display unit 12.7mm(1/2"), 7digits
highly bright fluorescent tube
sub display : 7segment 12digit Red-FND
size : 9.2(H)x4.8(W)mmx1line
Annunciators steady, zero, tare, gross, auto, print, hold
Decimal point position 0, 0.0, 0.00, 0.000
Keyboard ten key, zero, tare, tare reset, print, gross/net, grand total,
sub total, parts, number, hold, reset, auto, code, s/n&enter
DN510A : run, standby, sp1, sp2, sp3, sp4
External input signal opical-isolator
min. Division x1, x2, x5, x10, x20, x50
max. Display +550,000
Rear panel Loadcell input : 5pin connector
Remote control : 5pin input terminal (start, stop, tare, tare reset, zero)
BCD input : 37pin connector
C ontrol relay : 7pin terminal (final, drib, finish, batch finish, zero)
25pin : connector : 8pin control

GENERAL

SpecificationsAccuracy
Data memory back-up appr. 10year
Power 100/117/120/220/240V AC, ±10%, 50/60㎐ (factory preset)
Power consumption appr. 30VA
Operating condition temperature : -10~40℃ (14~104℉)
humidity : 85% Rh Max. (non-condensing)
Net weight 2.4kg
Gross weight 3.1kg
Physical dimensions (WxDxH) 200x175x105mm / (WxDxH) 7.87x6.89x4.33inch
Fuse 250V/1A

 

Option

  • Printer I/F : Centronics Parallel
  • Analod Out : V - out(0~10V)
  • Analod Out : I - out(4~20mA)
  • Serial I/F : RS 422, RS485
  • BCD Out-put

 

DIMENSIONS

Applications

 

Digital weighing indicator - DN500N

list

  • Platform scale, Truck scale,
  • Tension/compression tester, Horse weigher,etc.
  • 50 kind of parts number can be memorized
  • Watch-dog function installed for diagnostics
  • Data back up against power stoppage.
  • Front display window covered by lexan film for the protecting of dust
  • Weighing judgment by over & under setting when printer is connected
  • Three kinds of hold function (peak-hold and averagehold, auto-hold)
  • Can drive up to 8pcs of load cell (350.)
  • RS-232C and CURRENT LOOP standard installed

catalog

catalog

qna

 

SPECIFICATIONS

SpecificationsAccuracy
Load cell excitation 10VDC±5%, 320mA
Input Signal 0.5 ~ 3.0mV/V
A/D converting speed 200times/sec
A/D converter resolution 1/520,000 counts(19bits), Δ∑
Non-linearity 0.01% of full scale
Zero adjustment range -0.6mV~42mV
Display Unit 7 segment, 20.0mm(H)×13.0(W)mm
Annunciator steady, zero, tare, gross, auto, print, hold,Interface
Decimal point position 0, 0.0, 0.00, 0.000
Keyboard Number key and function key 16 PCS.
Temperature-drift zero ±20PPM/℃, span ±20PPM/℃
Non-linearity 0.01% of full scale
Rear panel Loadcell input : 5pin connector
External control : 12pin input terminal
(zero, tare,tare reset/hold/print, gross/hold reset/subprint,Current loop, RS232C)
Power SMPS Free Voltage (85V~265V)

 

Option

  • Analog Out-put (V-out) : 0~10V
  • Analog Out-put (I-out) : 4~20mA
  • Serial I / F : RS-422, RS-485
  • BCD In-put
  • BCD In-out
  • RS3232C and Current loop : Standard Installed

 

DIMENSIONS

 

Digital weighing indicator - DN510N

list

  • Control for PACKER, FILLER, HOPPER
  • CHECKER, LIMIT SCALE etc.
  • Totaling function by Parts.(50 parts)
  • 4 Step control (SP1, SP2, SP3, SP4)
  • 6 control relay built-in (SP1, SP2, SP3, SP4, FINISH, NEAR ZERO)
  • Various Relay output mode (LIMIT, PACKER,  CHECKER1, CHECKER2)
  • Improved A/D Conversion speed and resolution(Max. 200times, 1/520,000)

catalog

catalog

qna

 

SPECIFICATIONS

SpecificationsAccuracy
Load cell excitation 10VDC±5%, 320mA
Input Signal 0.5 ~ 3.0mV/V
A/D converting speed 200times/sec
A/D converter resolution 1/520,000 counts(19bits), Δ∑
Non-linearity 0.01% of full scale
Zero adjustment range -0.6mV~42mV
Display Unit 7 segment, 20.0mm(H)×13.0(W)mm
Annunciator steady, zero, tare, gross, auto, print, hold,Interface
Decimal point position 0, 0.0, 0.00, 0.000
Keyboard Number key and function key 12 PCS.
Temperature-drift zero ±20PPM/℃, span ±20PPM/℃
Non-linearity 0.01% of full scale
Rear panel Loadcell input : 5pin connector
External control : 12pin input terminal
(zero, tare,tare reset/hold/print, gross/hold reset/subprint,Current loop, RS232C)
control relay output : 7pin terminal
Power SMPS Free Voltage (85V~265V)

DIMENSIONS

 

Digital weighing indicator - DN530N

list

  • Application of Packer, Filler, Hopper, Checker, Limit Scale, etc.
  • Totaling function by Parts.(50 parts)
  • 2 Step Control (SP1, SP2)
  • 6 Control RELAY according to MODE
  • LIMIT, PACKER MODE: (SP1, SP2, FINISH, UNDER NG, OVER NG, ZERO)
  • CHECKER MODE 1, 2, 3 : (SP1[LOW], SP2[HIGH], OK, NG, ZERO)
  • RELAY OUTPUT MODE: LIMIT, PACKER, CHECKER
  • Improved A/D Conversion speed and resolution(Max. 200times, 1/520,000)

catalog

catalog

qna

 

SPECIFICATIONS

SpecificationsAccuracy
Load cell excitation 10VDC±5%, 320mA
Input Signal 0.5 ~ 3.0mV/V
A/D converting speed 200times/sec
A/D converter resolution 1/520,000 counts(19bits), Δ∑
Non-linearity 0.01% of full scale
Zero adjustment range -0.6mV~42mV
Display Unit 7 segment, 20.0mm(H)×13.0(W)mm
Annunciator steady, zero, tare, Run, SP1, SP2, hold, Interface
Decimal point position 0, 0.0, 0.00, 0.000
Keyboard Number key and function key 12 PCS.
Temperature-drift zero ±20PPM/℃, span ±20PPM/℃
Non-linearity 0.01% of full scale
Rear panel Loadcell input : 5pin connector
External control : 12pin input terminal
(zero, tare, tare reset/hold/print, gross/hold reset/subprint, Current loop,RS232C)
control relay output : 7pin terminal
Power SMPS Free Voltage (85V~265V)

 

Option

  • Analog Out-put (V-out) : 0~10V
  • Analog Out-put (I-out) : 4~20mA
  • Serial I / F : RS-422, RS-485
  • BCD In-put
  • BCD In-out
  • RS3232C and Current loop : Standard Installed

 

DIMENSIONS

 

 

Pocket indicator

DN120

DN120

 

Explosion proof indicator

Explosion proof indicator_EXP-SB4P

EXP-SB4P

 

Pocket indicator - PDN10

list

  • Pocket indicator with battery. 
  • The PDN-10 has been designed specifically to operate with strain gauge sensors such as Load cell, Pressure Transducer. LVDT. etc. 
  • Peak hold
  • Auto Zero
  • Measuring Data Saving (Max 500pcs.)
  • Hi, Low Display LED

 

catalog

catalog

qna

 

SPECIFICATIONS

SpecificationsAccuracy
Power Source DC 9V battery
Electric current Consumption 15mA
LOAD CELL input range 1.0mV/V ~ 3.0mV/V, Potenticmeter : 100~10KΩ
Display 4 1/2 Digit LCD
Characters displayed +19999
Display Speed Approx. 10 times/sec
Decunak point Position 0, 0.0, 0.00, 0.000
A/D Sampling speed 100 times/sec
A/D Resolution 16 bit
Zero Adjust Range 100% F.S(AUTO ZERO)
Data stonage 500 data can be memorised
Data output RS232C Serial Interface

DIMENSIONS

 

Pocket indicator - PDN20

list

 The PDN-20 has been designed specifically to operate with strain gauge sensors such as Load cell, Pressure Transducer. LVDT. etc.

Pocket indicator with rechargeable battery.
PEAK HOLD FUNCTION
NG, OK judgments with LED display(with open collector output)
Connectable to computer through USB output cable 
Display reverse function.
Ergonomic, heavy-duty metal construction
UNIT CONVERSION : N, kgf, lbf ,ozf

catalog

catalog

qna

 

Dimensions

PDN20.png

Specification

 

SpecificationsAccuracy
Usable Sensor Strain gauge type sensor (Bridge  350Ω, 700Ω)
Range of Indication -99999 ~ +99999
A/D Transducer 16bit , 100times/sec
D/A Transducer 12bit
Indication of Measuring Value 5 Digit LCD ( Right/reverse display available)
Measuring Unit kgf , N , lbf , ozf
Condition indicating LED Indication of charge and compare output condition
Compare Output High, Low, Good
Analog Output DC ± 1V
Communication Output USB RS232
Range of using temperature -10℃ ~ 40℃, less than 80% RH (no dew condensation)
Weight  Approximately 800g
Power Nickel hydrogen (NimH), Chargeable Adapter (DC 9V)
Continuous Use Life Approximately 40 hours
Charging Time Approximately 8 hours
Standard components AC Chargeable Adapter , Handy case
Option 1. USB cable    2. Connector for analog output and relay output

 

Pocket indicator - DN120

list

  • The DN-120 has designed specifically to operate with strain gauge sensors such as Fast-measurement of Load cell, Pressure Transducer,LVDT, etc.
  • The setup sequence is simple and quick using four push buttons only. Quick sampling speed (100 times/sec).

catalog

catalog

qna

 

Feature

  • Simple outdoor using in use of battery.
  • Using rechargeable battery.
  • High resolving power(16bit A/D)
  • High precision(more than 0.012% F.S) and stability.
  • Quick sampling speed (100 times/sec)
  • Peak hold function
  • Comparison function ; open collector output
  • Calibration of actual load and sensor output value
  • Auto zero function
  • Cutting size:92×92mm - Weight:about 500g

Others

  • Option : RS232C(OP-01), RS485(OP-02), Comparison output (hi, Low)(Op-03), Peak/Sample Hold(OP-04), Back light(OP-05).

SPECIFICATIONS

SpecificationsAccuracy
Application sensor Strain guage sensor
Sensor adjustment range DC 5V
Zero adjustment range 100% F.S (auto zero)
Input signal 1.0, 1.5, 2, 3mV/V (Dip switch)
Display 0000~±19999
Display speed Approx 30times/sec (Adjustment available by buff setting)
Character height 7Segment 15mm
Decimal point Random setting available
Sampling speed Max 100times/sec
Zero variation within 0.01%/℃ (1mV/V)
Sensitivity variation within 0.01%/℃
Usage temperature range -10~60℃
Humidity less than 80% RH (no des condensation)
Power source used DC 7.2V Recharging battery DC 12V Adapter

DIMENSIONS

 

Graphic touch indicator

DN-GI200, GI100

DN-GI200, GI10

 

Overload limiter

DN9000

DN9000

 

Digital tachometer/rpm sensor maget type

 

 

 

 

 
 
 

※ Serial Interface (RS-232C) or Current Loop is Standard installed with 1 port.

 

 

 

 


Indicator

SM110, SM150

SM110, SM150

Indicator

YJ320T

YJ320T

 

Indicator

Truck scale Program

Truck scale Program

 

Indicator

DN711P

DN711P

 

Graphic touch indicator - DN-GI200, GI100

list

. Grapic Indicator-Color Graphic LCD Touch Screen.
. Diverse of Load Control Mode.
DN-GI100: 1ch indicator (load cell)
                -High sampling speed , 4,000/1sec

DN-GI200: 2ch indicator (CH1 :load cell,CH2:Distance Sensor)
               - High Sampling Speed: 2,000/1sec.(per 1ch )

catalog

catalog

qna

 

gi drawing.jpg 

 

SpecificationsDN-GI200,  GI100
Sensor EXC            A-CH (load cell):DC 10/5V,120mA,                         B-CH : B-CH(Distance Sensor)
Input Signal Range            A-CH ;0~±40mA,                                                  B-CH :0 ~±10V,4~20mA,0~20mA
Conversion Speed            A-CH : 4,000times/sec.                                          B-CH : 2000/sec
Non-linearity            A-CH : ±0.02% F.S +1digit,                                    B-CH : ±0.02% F.S+1digit
Input Sensitivity            A-CH :1.0㎶/Digit,                                                   B-CH :1.0mV/Digit (0~10V)
Input Impedance            A-CH 10Mohm                                                       B-CH :1 Mohm / 50ohm
Temperature Factor. ±0.005% of rdg +0.5 digit/℃
Analogue Filter 10,30,300,600 Hz
Digit 0~±99999
Circumstance 0~40℃
Power AC 100~240V, 50/60Hz
Consumed Power Around 32VA
Output

                        Standard : Relay Output (HH,HI,GO,LO,LL)                                                    

                        OPTION:1.RS-232C serial output
                                      2.RS-485 serial output
                                      3.±0~10V or 4~20mA Analogue output
                                      4.BCD parallel output
                                      5.SD memory card

Display Window STN color LCD, 74(W)×55(H)mm

 

Pocket indicator - DN120

list

  • The DN-120 has designed specifically to operate with strain gauge sensors such as Fast-measurement of Load cell, Pressure Transducer,LVDT, etc.
  • The setup sequence is simple and quick using four push buttons only. Quick sampling speed (100 times/sec).

catalog

catalog

qna

 

Feature

  • Simple outdoor using in use of battery.
  • Using rechargeable battery.
  • High resolving power(16bit A/D)
  • High precision(more than 0.012% F.S) and stability.
  • Quick sampling speed (100 times/sec)
  • Peak hold function
  • Comparison function ; open collector output
  • Calibration of actual load and sensor output value
  • Auto zero function
  • Cutting size:92×92mm - Weight:about 500g

Others

  • Option : RS232C(OP-01), RS485(OP-02), Comparison output (hi, Low)(Op-03), Peak/Sample Hold(OP-04), Back light(OP-05).

SPECIFICATIONS

SpecificationsAccuracy
Application sensor Strain guage sensor
Sensor adjustment range DC 5V
Zero adjustment range 100% F.S (auto zero)
Input signal 1.0, 1.5, 2, 3mV/V (Dip switch)
Display 0000~±19999
Display speed Approx 30times/sec (Adjustment available by buff setting)
Character height 7Segment 15mm
Decimal point Random setting available
Sampling speed Max 100times/sec
Zero variation within 0.01%/℃ (1mV/V)
Sensitivity variation within 0.01%/℃
Usage temperature range -10~60℃
Humidity less than 80% RH (no des condensation)
Power source used DC 7.2V Recharging battery DC 12V Adapter

DIMENSIONS

 

Pocket indicator - PDN20

list

 The PDN-20 has been designed specifically to operate with strain gauge sensors such as Load cell, Pressure Transducer. LVDT. etc.

Pocket indicator with rechargeable battery.
PEAK HOLD FUNCTION
NG, OK judgments with LED display(with open collector output)
Connectable to computer through USB output cable 
Display reverse function.
Ergonomic, heavy-duty metal construction
UNIT CONVERSION : N, kgf, lbf ,ozf

catalog

catalog

qna

 

Dimensions

PDN20.png

Specification

 

SpecificationsAccuracy
Usable Sensor Strain gauge type sensor (Bridge  350Ω, 700Ω)
Range of Indication -99999 ~ +99999
A/D Transducer 16bit , 100times/sec
D/A Transducer 12bit
Indication of Measuring Value 5 Digit LCD ( Right/reverse display available)
Measuring Unit kgf , N , lbf , ozf
Condition indicating LED Indication of charge and compare output condition
Compare Output High, Low, Good
Analog Output DC ± 1V
Communication Output USB RS232
Range of using temperature -10℃ ~ 40℃, less than 80% RH (no dew condensation)
Weight  Approximately 800g
Power Nickel hydrogen (NimH), Chargeable Adapter (DC 9V)
Continuous Use Life Approximately 40 hours
Charging Time Approximately 8 hours
Standard components AC Chargeable Adapter , Handy case
Option 1. USB cable    2. Connector for analog output and relay output

 

Pocket indicator - PDN10

list

  • Pocket indicator with battery. 
  • The PDN-10 has been designed specifically to operate with strain gauge sensors such as Load cell, Pressure Transducer. LVDT. etc. 
  • Peak hold
  • Auto Zero
  • Measuring Data Saving (Max 500pcs.)
  • Hi, Low Display LED

 

catalog

catalog

qna

 

SPECIFICATIONS

SpecificationsAccuracy
Power Source DC 9V battery
Electric current Consumption 15mA
LOAD CELL input range 1.0mV/V ~ 3.0mV/V, Potenticmeter : 100~10KΩ
Display 4 1/2 Digit LCD
Characters displayed +19999
Display Speed Approx. 10 times/sec
Decunak point Position 0, 0.0, 0.00, 0.000
A/D Sampling speed 100 times/sec
A/D Resolution 16 bit
Zero Adjust Range 100% F.S(AUTO ZERO)
Data stonage 500 data can be memorised
Data output RS232C Serial Interface

DIMENSIONS

 

Digital indicator - DN-130T

list

These indicators can use Torque and RPM measurement at the same time. Digital display and analog output, comparison output are available.

catalog

catalog

qna

 

Feature

  • Torque, RPM simultaneous measurement
  • High resolution (24bit ADC, 16bit DAC)
  • High precision (more than 0.012% F.S) and stability
  • Upper and lower limit comparison output (Torque, RPM)
  • analog output (Torque, RPM)
  • UNIT CONVERSION : kg, N, ℓb, kg/㎠, bar, MPa
  • Quick sampling speed (1000times/sec)
  • Watch dog
  • Calibration of actual load and sensor output value
  • Display part and analogue zero by auto zero (DAC)
  • Analog out (DAC)

Option

  • OP-02 : RS232C serial interface
  • OP-03 : RS485 Multi drop interface

SPECIFICATIONS

SpecificationsAccuracy
DN130TDN230A
Application sensor Torque : Brush type torquemeter
RPM : Proximity sensor (MP981)
Torque : Brushless type torquemeter (trC)
RPM : Proximity sensor (MP981)
Sensor authorized voltage Torque : DC 5V
RPM : DC 12V
Torque : DC 2Vrms, 5kHz
RPM : DC 12V
Zero adjustment range Torque : 100% F.S (Auto Zero)
Input signal Torque : 0.5 ~ 3mV/V
RPM : DC 12V
Torque : 0.5 ~ 2mV/V
RPM : 1 ~ 350 pulse/circle
Display Torque : -19999 ~ +99999
RPM : 0 ~ 60000
Character height 7 segment LED 14mm
A/D converter Torque 24bit 1000 times/sec
D/A converter Torque 16bit
Zero variation Torque Witdin 0.5㎶/℃
Sensitivity Torque Witdin 0.01%/℃
Voltage output DC 0 ~ 10V (4~20mA : in accordance witd customer request)
Contact capacity AC 250V 5A
Relay life time More tdan 5,000,000 times
Usage temperature range -10℃ ~ 60℃
Humidit Less tdan 80% RH (No dew condensation)
Power source used AC85 ~ 265V 50/60Hz
Dimensions 97 X 97 X 141mm
Cutting size 92.5 X 92.5mm
Weight About 1000g

DIMENSIONS

Digital indicator - DN150,250

list

The DN-100 and DN200 have designed specifically to operate with strain gauge sensors such as Fast - measurement of Loadcell, Torquemeters, Pressure Transducer, LVDT, etc,.

ㆍDN150 : sampling speed : Appr. 5000Times Per Second
ㆍDN250 : sampling speed : Appr. 1000Times Per Second

catalog

catalog

qna

 

 

Feature

  • High resolution
  • High precision (more than 0.01% F.S) and stability
  • Relay output : Hi, Low, NG, OK.
  • UNIT CONVERSION : kg, N, ℓb, kg/㎠, bar, MPa
  • Display part and analogue zero by auto zero
  • Calibration of actual load and sensor output value
  • Peak & sample hold
  • Watch dog

OPTION

  • OP-01 : BCD paralle out
  • OP-02 : RS232C serial interface
  • OP-03 : RS485 Multi drop interface

 

Specifications

SpecificationAccuracy
Application sensor Strain guage sensors
Sensor authorized voltage
(the number of Loadcell connection)
DC 5V, Loadcell(350?) available 4
Zero adjustment range 100%F·S (Auto Zero)
Input signal 0.5~3mV/V
Display -19999~+99999
Character height 7 Segment 14mm
Decimal point Random setting available
A/D converter DN150 : 16bit 5000 times/sec
DN250 : 24bit 1000 times/sec
D/A converter 16bit 1000 times/sec
Relay output Contact capacity : AC 250V 5A, Relay life time : more than 5,000,000 times
Zero variation Within 0.5μV/℃
Sensitivity variation Within 0.01%/℃
Voltage output DC 0 ~ 10V (4~20mA : in accordance with customer request)
Usage temperature range -10℃ ~ 60℃
Humidity Less than 80% RH (no dew condensation)
Power source used AC 85 ~ 265V 50/60Hz
Weight 1000g
Option
  • OP-01 : BCD output
  • OP-02 : RS232C serial interface
  • OP-03 : RS485 Multi drop interface
  • OP-04 : RS422A serial interface
  • OP-06:  Power 24VDC

제품치수 (unit:mm)

 

Digital indicator - DN40W

list

The DN-40W has designed specifically to operate with strain gauge sensors such as Fast - measurement of Loadcell, Pressure Transducer, LVDT, etc.

Option: Power Input 24V in accordance with customer request

catalog

catalog

qna

 

Feature

  • High resolution (24bit ADC)
  • High precision (more than 0.01% F.S) and stability
  • Quick sampling speed (1000times/sec)
  • Relay output : Hi, Low, NG, OK.
  • UNIT CONVERSION : kg, N, ℓb, kg/㎠, bar, MPa
  • Display part and analogue zero by auto zero
  • Dynamic analog out 
  • Built-in Shunt calibration switch
  • Peak & sample hold

OPTION

  • OP-01 : BCD paralle out
  • OP-02 : RS232C serial interface
  • OP-03 : RS485 Multi drop interface

Specifications

 

SpecificationsAccuracy
Application sensor Strain guage sensor (350Ω or 700Ω)
Sensor authorized voltage
(the number of Loadcell connection)
DC 5V, Loadcell(350Ω) available 4
Zero adjustment range 100% F·S (Auto Zero)
Input signal 0.5 ~ 3.0mV/V
AD converter 24bit 1000times/sec
Answering frequency DC ~ 10kHz (-3dB)
Display -19999 ~ +99999
Display speed Appox. 32times/sec
Character height 7Segment 14mm
Decimal point Random setting available
Sampling speed Max 1000 times/sec
Zero variation within 0.5μV/℃
Sensitivity variation 50ppm/℃
Voltage output 0 ~ 10V
(4~20mA : in accordance with customer request)
Usage temperature range -10℃ ~ 60℃
Humidity less than 80% RH (no dew condensation)
Power source used AC 220V 50/60Hz
Relay output Contact capacity : AC 250V 5A
Relay life time : more than 5,000,000 times

 

 

Digital indicator - DN50W

list

  • The DN-50W has designed specifically to operate with strain gauge sensors such as Fast - measurement of Loadcell, Pressure Transducer, LVDT, etc. The setup sequence is simple and quick using four push buttons only.
  • And comparison output are available.
  • Sampling speed : Appir. 1000Times Per Second
  • Option: Power Input 24V in accordance with customer request

catalog

catalog

qna

 

Feature

  • High resolution (24bit ADC, 16bit DAC)
  • High precision (more than 0.01% F.S) and stability
  • Quick sampling speed (1000times/sec)
  • Relay output : Hi, Low, NG, OK.
  • UNIT CONVERSION : kg, N, ℓb, kg/㎠, bar, MPa
  • Display part and analogue zero by auto zero
  • Analog Peak Hold
  • Small Size (96×48×128mm)
  • Built-in Shunt calibration switch
  • Peak & sample hold
  • Watch dog

OPTION

  • OP-01 : BCD paralle out
  • OP-02 : RS232C serial interface
  • OP-03 : RS485 Multi drop interface

SPECIFICATIONS

SpecificationsAccuracy
Application sensor Strain guage sensor (350Ω or 700Ω)
Sensor authorized voltage
(the number of Loadcell connection)
DC 5V, Loadcell(350Ω) available 4
Zero adjustment range 100% F·S (Auto Zero)
Input signal 0.5 ~ 3.0mV/V
AD converter 24bit 1000times/sec
DA converter 16bit 1000 times/sec
Display -19999 ~ +99999
Display speed Appox. 32times/sec
Character height 7Segment 14mm
Decimal point Random setting available
Sampling speed Max 1000 times/sec
Zero variation within 0.5μV/℃
Sensitivity variation 50ppm/℃
Voltage output 0 ~ 10V
(4~20mA : in accordance with customer request)
Usage temperature range -10℃ ~ 60℃
Humidity less than 80% RH (no dew condensation)
Power source used AC 85 ~ 265V 50/60Hz
Relay output Contact capacity : AC 250V 5A
Relay life time : more than 5,000,000 times

DIMENSIONS

Digital indicator - DN10W, DN15W

list

 
 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 



Other Product In Group "DACELL Loadcell Torque sensor (5)"