E-Catalog > RITEN > Hydraulic Face Drivers

PAGE VIEW : 3,568

Product Information :

Name :
Hydraulic Face Drivers
Category :
  1. เครื่องจักร, อุปกรณ์เกี่ยวกับเครื่องจักร, เครื่องมือกล
Sub - Category :
  1. RITEN
Brand :
Riten
Model :
Hydraulic Face Drivers
Product Type :
  1. สินค้า, ผลิตภัณฑ์
Short Description :
Hydraulic Face Drivers

Product Detail :

Hydraulic Face Drivers

 

a1112

Type 60  /  Driving Diameter Range:  0.28 – 0.55 Inch

The Type 60 Series allows a driving diameter of 0.28 inch to 0.55 inch. This design is generally used in medium roughing operations and can handle loads of up to 3,000 Ibs. The pressure equalization of the driving pins is provided by hydraulic fluid. This permits a seven-degree pitch on the end face of the part. Behind every driving pin is a sealed piston that prevents oil leakage. The oil cavities behind the pistons are interconnected and the whole system is enclosed. This series is available in a taper shank, chuck or flange mount. The flange mount is preferred due to higher stability and increased concentricity capabilities.  View Catalog Page

 

a1112

Type 61  /  Driving Diameter Range:  0.60 – 0.98 Inch

The Type 61 Series allows a driving diameter of 0.60 inch to 0.98 inch. This design is generally used in medium roughing operations and can handle loads of up to 3,000 Ibs. The pressure equalization of the driving pins is provided by hydraulic fluid. This permits a seven-degree pitch on the end face of the part. Behind every driving pin is a sealed piston that prevents oil leakage. The oil cavities behind the pistons are interconnected and the whole system is enclosed. This series is available in a taper shank, chuck or flange mount. The flange mount is preferred due to higher stability and increased concentricity capabilities.  View Catalog Page

 

a1112

Type 62  /  Driving Diameter Range:  0.94 – 1.73 Inch

The Type 62 Series allows a driving diameter of 0.94 inch to 1.73 inch. This design is generally used in medium roughing operations and can handle loads of up to 3,000 Ibs. The pressure equalization of the driving pins is provided by hydraulic fluid. This permits a seven-degree pitch on the end face of the part. Behind every driving pin is a sealed piston that prevents oil leakage. The oil cavities behind the pistons are interconnected and the whole system is enclosed. This series is available in a taper shank, chuck or flange mount. The flange mount is preferred due to higher stability and increased concentricity capabilities.  View Catalog Page

 

a1112

Type 63  /  Driving Diameter Range:  1.42 – 2.38 Inch

The Type 63 Series allows a driving diameter of 1.42 inch to 2.38 inch. This design is generally used in medium roughing operations and can handle loads of up to 3,000 Ibs. The pressure equalization of the driving pins is provided by hydraulic fluid. This permits a seven-degree pitch on the end face of the part. Behind every driving pin is a sealed piston that prevents oil leakage. The oil cavities behind the pistons are interconnected and the whole system is enclosed. This series is available in a taper shank, chuck or flange mount. The flange mount is preferred due to higher stability and increased concentricity capabilities.  View Catalog Page

 

a1112

Type 64  /  Driving Diameter Range:  1.93 – 2.91 Inch

The Type 64 Series allows a driving diameter of 1.93 inch to 2.91 inch. This design is generally used in medium roughing operations and can handle loads of up to 3,000 Ibs. The pressure equalization of the driving pins is provided by hydraulic fluid. This permits a seven-degree pitch on the end face of the part. Behind every driving pin is a sealed piston that prevents oil leakage. The oil cavities behind the pistons are interconnected and the whole system is enclosed. This series is available in a taper shank, chuck or flange mount. The flange mount is preferred due to higher stability and increased concentricity capabilities.  View Catalog Page

 

a1112

Type 66  /  Driving Diameter Range:  3.24 – 4.33 Inch

The Type 66 Series allows a driving diameter of 3.24 inch to 4.33 inch. This design is generally used in medium roughing operations and can handle loads of up to 3,000 Ibs. The pressure equalization of the driving pins is provided by hydraulic fluid. This permits a seven-degree pitch on the end face of the part. Behind every driving pin is a sealed piston that prevents oil leakage. The oil cavities behind the pistons are interconnected and the whole system is enclosed. This series is available in a taper shank, chuck or flange mount. The flange mount is preferred due to higher stability and increased concentricity capabilities.  View Catalog Page

 

a1114

Type 68  /  Driving Diameter Range:  4.66 – 5.74 Inch

The Type 68 Series allows a driving diameter of 4.66 inch to 5.74 inch. This design is generally used in medium roughing operations and can handle loads of up to 3,000 Ibs. The pressure equalization of the driving pins is provided by hydraulic fluid. This permits a seven-degree pitch on the end face of the part. Behind every driving pin is a sealed piston that prevents oil leakage. The oil cavities behind the pistons are interconnected and the whole system is enclosed. This series is available in a taper shank, chuck or flange mount. The flange mount is preferred due to higher stability and increased concentricity capabilities.  View Catalog Page



Other Product In Group "RITEN (28)"